PDA

View Full Version : dizzy issues


ej1reddevil
11-13-2009, 02:27 PM
my dizzy went out a couple days ago and when it did i discovered that the 3rd cylinder plug came out. i replaced and it was working fine until now. i dont know whats causing this issue. some say its my plugs. some say its my harness and other say it could be the internals of the dizzy. what do u guys think

JDMPuertoRican
11-13-2009, 10:04 PM
More details on what it's doing can help to give a better diag.... Is the car just turning over and no start or what? Well yes plugs, harness, and dizz can all be factors. If the coil went out an alternative is rebuild dizz with another coil or just purchase another for like 40-60 bux at your local parts dealer. I've seen accel has replacement coils now. Or you can start with the cheaper things like plugs, check harness etc.:nissanfan:

ej1reddevil
11-14-2009, 12:26 PM
it will just sit there and rotate. i have a new dizzy and new wires. the wires are sparking. i will check my plugs next. the main relay is good the ecu is good.

Ryan
11-14-2009, 12:52 PM
sounds like you need a new dizzy

ej6pusha1998
11-15-2009, 08:08 PM
When you say #3 wire, do you mean it came off the cap side, not the spark plug side? either way sounds to me like you have autozone wires, my friend had wires from there that did the same shit. Crazy man.

ej1reddevil
11-15-2009, 11:17 PM
yupp came off the cap. fuck autozone bull shit never going there again. the first set i got there was a crack in one of the wires causing a spark on the valve cover the 2nd ones were the ones that fucked up and these ones a very hard to put on the cap. piece of shit auto zone. but i fixed it. the shock from the plug moving fouled the plugs out

jdm_crx_whore
12-27-2009, 01:30 PM
i have a dizzy for 40
txt me 602-466-8568