PDA

View Full Version : HELP!! sparkplug problems

dj411
12-21-2009, 11:59 PM
why are my sparkplugs wet with oil?

did i blow a ring?
RHDJDM
12-22-2009, 12:03 AM
did u over fill the block with oil
sincityDaGezer
12-22-2009, 12:05 AM
did u recently change the valve cover??leaky seal??more info??lol
dj411
12-22-2009, 12:14 AM
did u over fill the block with oil
nah.

did u recently change the valve cover??leaky seal??more info??lol
well we replaced the valve cover gasket becuz it was leaking. and then just did an oil change
that one guy
12-22-2009, 12:46 AM
did you replace the tube seals when you changed the valve cover gasket?
dj411
12-22-2009, 12:57 AM
did you replace the tube seals when you changed the valve cover gasket?
no. and on sunday
that one guy
12-22-2009, 01:53 AM
change the tube seals, that's where the oil is leaking. or, pop them off and wipe off all of the oil, clean off the metal surface and put down a thin layer of hondabond/rtv
turbo4dr
12-22-2009, 08:15 PM
how much oil is on the plugs?
if it is a large amount of oil then do a compression test to see if your rings are still good.
DOHCTORJ
12-22-2009, 11:20 PM
None of the above!

Is it a single cam? If yes then it is the cam carrier orings there are 4 of them,1 for each cylinder.

Remove valve cover and cam carrier,replace o-rings and retorque harware.