What Did You Do To Your Eg Today?

[xswingkidx]

EFfective started this in the EF section and I thought it was cool so I'm stealing his idea. Post up what you have done to your civic today, what project you're working on, etc. And let's be honest, everyone wants to see pics so post those up too.

I'll start off with a pic of my dirty engine bay and a progress pic of the urethane motor mount inserts I'm installing.

http://img.photobucket.com/albums/v727/xswingkidx/Cars/DSC07562.jpg

[lowNslow]

Well i dug my hatch outta 21" of snow yesterday. Today i washed an ass load of salt off it.....fuck snow.....

[EFfective]

^^damn that sucks!

[Civicious]

put new bulbs in my tail lights, cleaned the interior vents/speaker covers

[Sound=vibration]

Start switching tranny to my new motor...

[crxgonemad.a6]

putting on new head gasket an exhaust an paintin motor, someone tell me how to post pics! lol

[rotneg]

i drove it

[Civicious]

to post pics u upload them into your albumn. its in ur user cp!

[brandon]

i put a new pass.fender, amber corners, and black housing headlights

[95sedanaccord]

i walked by my car as i was exiting the garage and gave her a pat....haha i did too much shit to it last night finishin up the reboosting

[Dead Bird]

Take pictures doods

[JDM Jon]

What I did YESTERDAY, sorry I broke the rules but only had time to post it today.
Took a picture of my bov ;)

http://i66.photobucket.com/albums/h265/JonDoe15/DSC_0780.jpg

[crxgonemad.a6]

took head off an intake mani to replace gaskets an cleaning an stripping for paint what do u guys think a green block or black block? my car is a green eg

[jdm_crx_whore]

i raised my ej a lil cuz i was eatin my tires like crazy

need camber kit asap

[Crazy88]

Installed about 5 gallons of 87 octane. Knocked that out in about 45 seconds, damn I'm good.
Then I rotated my tires several thousand times by driving to Sahuarita and back. Also added a new fart to my driver's seat.

Busy day.

[Sound=vibration]

Got her running. With the z6 swap hooked up my vtec and no longer have any cels wooot

[xracerx]

sanded on the bumpers and fenders.

[that one eg]

intake mani

[lowNslow]

Watched mine drive away :'(

[SimTechDJ]

replaced steering rack, adjusted front ride height, replaced steering wheel, bled out clutch fluid... yup, sounds about right.

[jdm_crx_whore]

got it impounded

[SGoodale]

I looked at it this morning.. wished i could drive it to school. but no insurance and suspended plates = ( lol

[Dead Bird]

Poor Sarah!

[SGoodale]

lol I know. it sucks = (

[Dead Bird]

at least all you have to do is pay a bit of money to drive again

[08blacksi]

I just purchased my eg

[93civiceg]

http://i53.photobucket.com/albums/g67/kylcdy/IMG00130.jpg
well i did this on sunday... not today

[Zipp]

EJ, Close enough. I pulled my ebrake cover yesterday. Gonna try an integra armrest (just back half, not the front half around the shifter) today and see how it fits!!!

[Colten79]

Got a new bumber and new spoon lip..

http://i144.photobucket.com/albums/r199/coltenashley/IMG00003-20100107-1618.jpg

[Zipp]

Got a new bumber and new spoon lip..

[IMG]http://i144.photobucket.com/albums/r199/coltenashley/IMG00003-20100107-1618.jpg[IMG/]

NICE! I'm lookin at lip kits now. Can't decide

[Colten79]

There fixed the pic

[JDM Jon]

http://i53.photobucket.com/albums/g67/kylcdy/IMG00130.jpg
well i did this on sunday... not today

LOL wtf hahahaha

[Civicious]

NICE! I'm lookin at lip kits now. Can't decide'


oem lip ftw! you wont regret trying to find one instead of finding some knock off shit




i put some eyebrows on, rear license plate LED lights in, LED cluster & climate control, and LED city lights today!

[JDM Jon]

Wrapped my downpipe ;)

[Zipp]

'


oem lip ftw! you wont regret trying to find one instead of finding some knock off shit




i put some eyebrows on, rear license plate LED lights in, LED cluster & climate control, and LED city lights today!

Lets see those LEDs!

[Civicious]

you can come by and see them! i live down the street from you lol

heres pics. there a lil dark with no flash.



4 LED dome light bulb kicks ass and is nice and bright!

http://www.azht.net/forum/picture.php?albumid=863&pictureid=4849

climate control red LEDs

http://www.azht.net/forum/picture.php?albumid=863&pictureid=4848

red LEDs in dx gauge cluster. pic sucked cause of streetlight glare

http://www.azht.net/forum/picture.php?albumid=863&pictureid=4847

license plate LEDs
http://www.azht.net/forum/picture.php?albumid=863&pictureid=4846

City Lights LEDs. my headlights are REALLY foggy on the inside so they arent as bright
http://www.azht.net/forum/picture.php?albumid=863&pictureid=4845

http://www.azht.net/forum/picture.php?albumid=863&pictureid=4844

[ALLBLVCK]

i wish i had an eg:(

[JDM Jon]

You're not gonna trade your teg for the one you posted? ^

[Colten79]

'


oem lip ftw! you wont regret trying to find one instead of finding some knock off shit


X2x2... I had a knock off fake mugen lip before, and it just didn't sit right.. The spoon one fit like a glove and looks a lot better imo...

[SimTechDJ]

integra master cyl, booster and LF brake hose

[Civicious]

Jon;1824768']You're not gonna trade your teg for the one you posted? ^


theres not enough grandmas on this site interested in a 4 door automatic lol





If u dont like OEM i'd go with the spoon one also

[Colten79]

Put the new suspension to the test while I was in a little hurry home..

NIIIIIIIICE

[onefst91hatch]

finished up my wire tuck and made a custom shifter mount. just gotta put my dash back in and get a fuel line fitting and the K car will be on the streets!!

[SimTechDJ]

shift bushings, both torque mounts, license plate lights...

[dannykhaos]

http://i53.photobucket.com/albums/g67/kylcdy/IMG00130.jpg
well i did this on sunday... not today

lol been wanting to do this but i cant find any balls

[Hernandez1227]

got new tires, new brake shoes, blackwork lugs.. now theres no funds. lol

[Colten79]

Drove it and decided to raise it a little..

[Civicious]

i got HIDS yay!

[jdm_crx_whore]

sorry to sound stupid but wat are city lights!!im not a pro on the subject

[Civicious]

with the jdm headlights or the ebay black housing ones there is a an extra hole inside the headlight for parking/running lights

[Colten79]

They were made for the evenings/ or when your in well-lit areas where you don't really need your lights to see, but so other people can see you better.. Pretty much like parking lights.. Civicious got it on point..

[jdm_crx_whore]

yea reserched a lil and found out how they work and astuff

[Colten79]

anything i'm missing?

[93civiceg]

lol been wanting to do this but i cant find any balls

spencers man! like $10

[Da(JDM)Paseo]

touched up the bay and getting the wire tuck going so I can drop an ls swap soon

http://i896.photobucket.com/albums/ac165/Eric-Salguero/DaJDMPaseo/ProjectEG/DAJDMPASEOEG.jpg

http://i896.photobucket.com/albums/ac165/Eric-Salguero/DaJDMPaseo/ProjectEG/DAJDMPASEOEG1.jpg

http://i896.photobucket.com/albums/ac165/Eric-Salguero/DaJDMPaseo/ProjectEG/DAJDMPASEOEGbay1.jpg

http://i896.photobucket.com/albums/ac165/Eric-Salguero/DaJDMPaseo/ProjectEG/DAJDMPASEOEGbay.jpg

http://i896.photobucket.com/albums/ac165/Eric-Salguero/DaJDMPaseo/ProjectEG/DAJDMPASEOEGbay2.jpg

http://i896.photobucket.com/albums/ac165/Eric-Salguero/DaJDMPaseo/ProjectEG/DAJDMPASEOLSBLOCK.jpg

[skar1]

Looks good^^ I haven't been able to finish shit on mine cause of my fucked work schedule but I might post something in here by sunday night...hopefully

[jdm_crx_whore]

touched up the bay and getting the wire tuck going so I can drop an ls swap soon

http://i896.photobucket.com/albums/ac165/Eric-Salguero/DaJDMPaseo/ProjectEG/DAJDMPASEOEG.jpg

http://i896.photobucket.com/albums/ac165/Eric-Salguero/DaJDMPaseo/ProjectEG/DAJDMPASEOEG1.jpg

http://i896.photobucket.com/albums/ac165/Eric-Salguero/DaJDMPaseo/ProjectEG/DAJDMPASEOEGbay1.jpg

http://i896.photobucket.com/albums/ac165/Eric-Salguero/DaJDMPaseo/ProjectEG/DAJDMPASEOEGbay.jpg

http://i896.photobucket.com/albums/ac165/Eric-Salguero/DaJDMPaseo/ProjectEG/DAJDMPASEOEGbay2.jpg

http://i896.photobucket.com/albums/ac165/Eric-Salguero/DaJDMPaseo/ProjectEG/DAJDMPASEOLSBLOCK.jpg
not very sure but i was told u can use ur d series mount for the swap u jst need the driver side mount

[Colten79]

the acual mount yes, but you use the integra/b-series bracet (peice of the mount that bolts to the block)..
tranny mount is the same for eg/dc d/b-series.. back mount is the same

[jdm_crx_whore]

okm cool

[Colten79]

Oh yeah... For got to mention, rear t-bracket is different

[nyenye09]

i took my broken lip and fuk'd up bumper off mine..

fuk'n deer.. :facepalm:

story is: was drivin home from school, and big ass truck was passin me, and deer jumped infront of him, he hit it, and it flew onto my eg...

also lowerd it more though.. :clap:

[Colten79]

^^ forreal? That sucks bro...

[dannykhaos]

put a rebuilt rack and pinion in

[jdm_crx_whore]

i put a new bumper on

[SimTechDJ]

used header installed.

[jdm_crx_whore]

<img src=''http://c2.ac-images.myspacecdn.com/images02/116/l_9b784061a47043e8b1dbb433477bf339.jpg''>

[jdm_crx_whore]

put dis on ma dash

http://c2.ac-images.myspacecdn.com/images02/116/l_9b784061a47043e8b1dbb433477bf339.jpg

[jdm_crx_whore]

looks like this on my dashalso selling it or trading http://www.autotoys.com/pics/49202.jpg

[nyenye09]

^^ forreal? That sucks bro...

i know... :thumbsdown:

[ArsonALL]

just got a VX taking the 17" it had and puttin on some SI's

[ArsonALL]

I'm tryn to get the most MPG out of it as possible im gettin 37 right now with the heavy ass 17"

[Colten79]

My brother bought me some smoked ember corner lights.. So I put them on..

[TwoGlassEyes]

A friend and I changed the timing belt, condenser belt and alternator belt. The timing belt had 117k miles on it and still looked to be in terrific shape... but I won't take any chances and won't wait that long again (I bought the car with 111k on it, so I'm only 6k miles too lazy...).

[salasaz]

washed it

[TwoGlassEyes]

just got a VX taking the 17" it had and puttin on some SI's

17" on a VX? Crazy. Most I've been able to get so far is 44 mpg, but VXs benefit from low rolling resistance tires. I'm hoping to get some Sumitomo HTR T4s for them soon. Remember that VX is supposed to use 165/70/13s, and not the 175s that other trims use.

[PENTAGRAM_OF_EVIL]

got a gsr tran. and 550cc injectors. not on yet but got.

[smcdonaldaz]

Pulled the dash to put on a new stereo bezel and installed the stereo! Now I got tunes, just need a head for my d17b7. Looking at a long block tonight. Hopefully soon I'll be mobile!

[SimTechDJ]

replaced the stripped out rear glass bolts... no more noisy rear glass!

[Otacon]

Got the z6 swap put in about 97% complete starting tomorrow....

[SimTechDJ]

realized that my alternator is a huge piece of... wothless metal.

[czr7]

started sanding down for new paint job and took a dent of the bumper

[Colten79]

Got a BEAKS* lower tie bar...
Nniiiiiiiiiiiiice

[SimTechDJ]

replaced alternator and belt... sweet 5 minute jobs!!!

[that one eg]

switched ecu's and drove it haha

[SimTechDJ]

there is a lot to be said for a vehicle that can be repaired in under 15minutes!

[jdmtim91]

i washed all the garage dust off mine

[Lude2Low]

http://i53.photobucket.com/albums/g67/kylcdy/IMG00130.jpg
well i did this on sunday... not today




HA! That's great.
I raped mine today. Tends to happen on the daily tho. before raping it, I put my shift light in

[smcdonaldaz]

picked up a brown armrest at the JY, painted it black, and installed it, Saturday. Today I'm going to prep the head I picked up so I can install it this weekend.

[imm0rtal]

Installed Spoon wiper brades, then took them off so they wouldn't get jacked :P

[Civicious]

u buy them off the dude on here? 75$ was good dealconsidering there 100$ new

[tealcp]

I was bored today swapped in a y8 manifold, put on headers, front lip and fog lights, and adjustable cam gear. post pics manana (tomorrow)

[TypeREgg]

today i did and oil change bled the brakes threw on my new 68 mm tb new silverstars bulbs for my fogs and new wiper blades last week i slapped on my type r style lip put the fogs on it and amber corners

[Yellow Submarine]

ordered a clutch saturday but today i drove by and saw it all durty....and then i died a lil inside

[PandaBear]

yesterday i bought a type r style lip and instaled my system. i put 2 twelve inch subs plus two 6x9's and two 6 and 1/2's in the doors of my hatch. its so loud

[imm0rtal]

u buy them off the dude on here? 75$ was good dealconsidering there 100$ newyeah, I couldn't resist. I wanted them to roll to Eibach, but they look really good so I'm happy I picked them up :P

[Colten79]

Damn that's baller shit son!! Lol

Replaced the rear mount spring and got new blinker fluid..

[czr7]

put new rear window

[Colten79]

Washed her..

[czr7]

work in progress so far fixed back bumper some dents and put in new window still needs alot of work





http://i58.photobucket.com/albums/g241/cesar_2/moto_0054.jpg


http://i58.photobucket.com/albums/g241/cesar_2/moto_0055.jpg

http://i58.photobucket.com/albums/g241/cesar_2/moto_0056.jpg

http://i58.photobucket.com/albums/g241/cesar_2/moto_0057.jpg

[LadyLockness]

i bought some lower control arms n finally received my hello kitty decal ^_^

[LadyLockness]

http://i46.tinypic.com/raxbv7.jpg



taaah dahhh

[hatch_wanna_b]

Swapped my matted down suede steering wheel for a Nardi 300mm woody wheel. Looks pretty ballin' with my Momo/Honda horn button.

[4dreg8]

bought some window visors for my four door post some pics wen i put them on

[Civicious]

i got a bunch of goodies at the junkyard. eg hatch black rear carpet, eg hatch random plastics,2 sets of mudflaps,2 armrests and sun visors!all for 20$ ftw! theres two full non molested eg hatches 4 non molested eg coupe ex's. and a couple DC's complete ! im in HEAVEN

[xswingkidx]

i got a bunch of goodies at the junkyard. eg hatch black rear carpet, eg hatch random plastics,2 sets of mudflaps,2 armrests and sun visors!all for 20$ ftw! theres two full non molested eg hatches 4 non molested eg coupe ex's. and a couple DC's complete ! im in HEAVEN

Which junk yard? I want to get mudflaps for mine. Any red coupes?

[Civicious]

in vegas

[08blacksi]

Got new amber corner lights

[SimTechDJ]

(yesterday)
replaced the clutch master cylinder... ohh fun : )

[dannykhaos]

Installed new axles
no more rattle during accel... Soooo nice

[Hernandez1227]

purple BWR lca's.. sickk as hell!

http://i48.tinypic.com/2yuhngn.jpg

[FranKeee!!!]

Havent really touched her in months cuase im deployed but i did buy some V-band clamps for the exhuast setup im gonna put on her.

[Gzrkid1]

Got i back yesterday and started to put the molding and lip kits back on . .

[Gzrkid1]

oh and just getting started to do my z6 turbo swap

[smcdonaldaz]

Hit the JY and picked up wiring and components to install cruise and power mirrors on my 93 coupe. gasket kit came in so I'll try to get the head together this week.

[Otacon]

Got the Z6 swap running better.... Anyone know a place to get a free code read...? obd1 of course just trying to figure out why my check engine light is still on... I dont know if its the vtec or not...

[imm0rtal]

stick a paper clip in the ecu pins that correspond to the check engine light and turn the key to on, bro.

I'm about to call skunk2 to get me some lca bushings :thumbsup:

[ALLBLVCK]

i bought one:)

[mr.lsvtec]

finished the sodering my headlight wiring for mywire tuckhttp://i640.photobucket.com/albums/uu126/babyrex22/cedspics007-1.jpg

[Sound=vibration]

Looked at her.. :( no insurance = no driving her

[imm0rtal]

selling a bunch of stuff today so I can buy JDM one piece headlights (del sol)

[imm0rtal]

^^sold stuff yesterday and bought a go-autoworks slim fan and some fabric to have some fun with :P

[92BlackEgMTX]

^ dang shoulda sold me some cool parts! lol

[osofast]

Installed a black center console with arm rest.

[Colten79]

finished the sodering my headlight wiring for mywire tuckhttp://i640.photobucket.com/albums/uu126/babyrex22/cedspics007-1.jpg


Mmmm niiiiiiiiice... engine bay looks badass :thumbup:

[Bottlefedb20]

Looks nice!^^^^^^^^^^^^^^^^^^^^^^^^^^^ anyways, I just ordered a crap-load of stuff for the hatch...! does that count?

[q&s]

I neglected my eg lately just havnt had time it sucks

[mr.lsvtec]

put on a gsr rear sway bar, omni camber kit, and adjusted the old ksports
oh and i threw on a manual RAck.......

[mr.lsvtec]

put on a gsr rear sway bar, omni camber kit, and adjusted the old ksports
oh and i threw on a manual RAck.......

http://i640.photobucket.com/albums/uu126/babyrex22/itrrearswaybar.jpg
http://i640.photobucket.com/albums/uu126/babyrex22/omnicamberkit.jpg
http://i640.photobucket.com/albums/uu126/babyrex22/rearswaybarandksport.jpg

[Civicious]

put some ek 4 door skirts we got from freds on my friends ej1. freds has some parts still avail. i even seen an hid kit in the passenger seat of an ek. also under new management

[TwoGlassEyes]

Put in my Del Sol seats, new stereo and new speakers.

Next stop: buy some stopper insulators, teal door handles and teal mirrors.

[dannykhaos]

installed fogs... in the dark. that takes skill haha

http://img.photobucket.com/albums/v468/mazpunx480/IMAGE_502.jpg

[smcdonaldaz]

installed the replacement head, intake, exhaust, and then realized I had the wrong throttle body gasket and no injector o-rings. None of the parts stores in the immediate area had them. Will have the gasket tomorrow from checker and will hit NAPA on my way home from work. Should have her running tomorrow!

[xswingkidx]

Replaced my faded, keyed trunk lid with a repainted, nearly mint one that I picked up from suavecito_64. Pics tomorrow assuming I get the car washed.

[EJ6-4DR]

i put on a skunk 2 intake mani and bwr 68mm tb and a u bolt clamp for my test pipe

[smcdonaldaz]

installed the replacement head, intake, exhaust, and then realized I had the wrong throttle body gasket and no injector o-rings. None of the parts stores in the immediate area had them. Will have the gasket tomorrow from checker and will hit NAPA on my way home from work. Should have her running tomorrow!

Found out the gasket kit was fine, I just have a 1.6 intake on my car. I'll have the right throttle body gasket today and it should fire. Got the ingector kits installed and have no leaks!

[czr7]

put in wires for speakers and washed her

[Sound=vibration]

Drove here up and down my block.. still no insurance. Oh new batt terminals and new alt terminal anc gave the batt a fresh charge

[Colten79]

Washed the hell outa her...
Had some cocky GT for lunch on my break... hehehe

[ej1reddevil]

put a new battery, tire, and starter...waitin for tax return for new front clip and mounts

[Otacon]

selling the old ecu outta my eg and did a shit ton of driving...

[Civicious]

i just traded my eg hatch for a dc4... :( :) goodbye thread ill stop by sometime and say hello

[mr.lsvtec]

http://i640.photobucket.com/albums/uu126/babyrex22/100_0426.jpg

painted

[Colten79]

^^ Hey me too... post pics up in a little bit...

[Colten79]

http://i144.photobucket.com/albums/r199/coltenashley/Mobile%20Uploads/Unknown.jpg
http://i144.photobucket.com/albums/r199/coltenashley/Mobile%20Uploads/Unknown-1.jpg

Didn't know what to do with the center caps, so I left them...
Not done with em yet.. got one more touch to do

[SimTechDJ]

installed a set of ITR 4x114.3 rear rotors and nissin ceramic pads.


if anyone needs rotors... let me know!

[Civicious]

http://i144.photobucket.com/albums/r199/coltenashley/Mobile%20Uploads/Unknown.jpg
http://i144.photobucket.com/albums/r199/coltenashley/Mobile%20Uploads/Unknown-1.jpg

Didn't know what to do with the center caps, so I left them...
Not done with em yet.. got one more touch to do

like that color. very different. gj!

[Colten79]

Thanks.. hey don't you have a dc now? What you doing in here? Ahaha just playin

[TypeREgg]

installednew windshield new b pipe finished body work and primered it with my homie!! ready for ifo

[Civicious]

Thanks.. hey don't you have a dc now? What you doing in here? Ahaha just playin


lol ya. i did say i was going to stop by and say hi once in awhile :). and ever since i got the dc this thread has died!

[Tytyler]

hahah true, my first post in here whaa!

I put new seats in and found about $5 in chnge under them! lol :thumbup:

[smcdonaldaz]

My first honda is now a daily driver! $800 car, $100 to get her running! YEA!

Now, who has a stock EG air box collecting dust?

[Civicious]

pmedd

[2slow94eg]

i gave my eg a ghetto car wash and and drove it through a huge puddle but it just made it look worse...

[Isma.phx.]

jst smiling at it lol

[mr.lsvtec]

http://i144.photobucket.com/albums/r199/coltenashley/Mobile%20Uploads/Unknown.jpg
http://i144.photobucket.com/albums/r199/coltenashley/Mobile%20Uploads/Unknown-1.jpg

Didn't know what to do with the center caps, so I left them...
Not done with em yet.. got one more touch to do


lookin very good
and more unique since every body
wants to do purple these days

[jcamacho]

I lent it to my boss. He's about to drive off and asks if it's registered and everything.

[SimTechDJ]

replaced the transmission fluid with Honda MTF... FTW!

at 245am mind you.

[cjb]

finished the sodering my headlight wiring for mywire tuckhttp://i640.photobucket.com/albums/uu126/babyrex22/cedspics007-1.jpg

looks really familiar... nice color choice..

[IS-Frank]

Just drove it to work and back was gonna stop by and wwash it but some one took my quarters from my coin pocket and just went home couse I didn't have any money on me.....

[B16-Integra]

I got mine running again!

[skar1]

Finally got in the mood to do work, just looked at mine today but started getting my lil bros swap ready for his eg. Got the tranny mounted to the block and got one starter bolt on, missing the other. He ordered bolts for his ls swap from honda, the tranny casing, mounts, and starter bolts but seems like some are missing, if any1 has the 3 bolts for the tranny mount lmk plz he's already spent a grip at honda so if i can save him a few bucks we'd appreciate it.

[slowsedan]

i did a tune-up, oil change, did front and back brakes, bought a new radiator, new coolant also, and getting some new shoes for my tegg soon:thumbsup:

[xswingkidx]

Got the wheels rotated and changed the oil. Also got to see the progress on my reinforced mounts for my GAB strut bar courtesy of EFfective. Snapped a pic of my recent suspension upgrades while it was on the rack too.

http://img.photobucket.com/albums/v727/xswingkidx/Cars/cid_237.jpg

http://img.photobucket.com/albums/v727/xswingkidx/Cars/IMG00238.jpg

http://img.photobucket.com/albums/v727/xswingkidx/Cars/IMG00239.jpg

[97cex]

Worked on my friends engine bay we pulled the engine on Wednesday so today degreaser pressure washed bay looking yo tuck some wires sand and paint bay it is my first hatchback to work on and it is coming along well!

[IS-Frank]

Today I took out the cluster and replaced the red lights it had on it from the previous owner and put some original lights on it and looks waybetter and installed my radio and speakers and just chilled next to it by the carport with a 24oz in my hand and my remote from my radio in the other listening to some corridos (spanish music) and some old shcool rap and oldies.... (I know sounds paisa chillin in the front drinkin beer witht the music all loud)

[94egb18]

Ordered my lip kit and side markers

[EFfective]

Got the wheels rotated and changed the oil. Also got to see the progress on my reinforced mounts for my GAB strut bar courtesy of EFfective. Snapped a pic of my recent suspension upgrades while it was on the rack too.

boooo i cant belive you posted pics of those doodoo welds before i got a chance to fix them and my messy ass tool box haha

[LiLinsane]

I heard this somewhere... "do it once, do it right".

LoL jk looks good brother, nothing a grinder cant clean up.

---

Pointed at it and laughed! then I mumured something about me hating it.... and i want my money back.

[smcdonaldaz]

Installed power mirrors!

[Dead Bird]

Posted it up for sale last night.
Washed it this morning.
http://i725.photobucket.com/albums/ww257/regnal10/Civic1.jpg
http://i725.photobucket.com/albums/ww257/regnal10/civic2.jpg
http://i725.photobucket.com/albums/ww257/regnal10/civic3.jpg
http://i725.photobucket.com/albums/ww257/regnal10/civic4.jpg
http://i725.photobucket.com/albums/ww257/regnal10/civic5.jpg
http://i725.photobucket.com/albums/ww257/regnal10/civic6.jpg
http://i725.photobucket.com/albums/ww257/regnal10/civic7.jpg
http://i725.photobucket.com/albums/ww257/regnal10/civic8.jpg
http://i725.photobucket.com/albums/ww257/regnal10/civic9.jpg
http://i725.photobucket.com/albums/ww257/regnal10/civic10.jpg
http://i725.photobucket.com/albums/ww257/regnal10/civic13.jpg

[imm0rtal]

been installing little shit here and there...no pics for you though! lol

[Colten79]

got some fun bolt-ons.. waiting for my dyno tune

[Dead Bird]

pictures colten!

[smcdonaldaz]

Drove it!

[smcdonaldaz]

got some fun bolt-ons..

That's what SHE said!:eek:

[98dc2]

Started sanding my hood, doing the rusted hood touch on mine, found some new doors and an oem stearing wheel also

[Zipp]

Bought and installed these... http://i271.photobucket.com/albums/jj156/cs6a-zero/Photo0167.jpg

[imm0rtal]

Just got off the phone with Skunk2 :o

[Colten79]

pictures colten!
now, now, now you know me...

That's what SHE said!:eek:

ahahaha fuckin ay

[Colten79]

oh yeah, put my camber kits on the other day, and went and got my alighnment TODAY!!!
feels amazing again

[smcdonaldaz]

Bought a z6 head to do a mini me! Thanks CR-Xtasy

[Dead Bird]

Drove it to and from work today.
Raced OhDang on the way home.

He needs Nos.
2 of the big ones.
And Harry, he needs them by tonight.

(i won! woo)

[98dc2]

Got new doors put on and finished sanding the hood waiting for the rust now. Oh yeah and got an oem stearing wheel and sideskirts. Need to finish body work and paint the bitch

[Jason.AZ1]

Drove it to and from work today.
Raced OhDang on the way home.

He needs Nos.
2 of the big ones.
And Harry, he needs them by tonight.

(i won! woo)

:lmao:

[OhDang]

Drove it to and from work today.
Raced OhDang on the way home.

He needs Nos.
2 of the big ones.
And Harry, he needs them by tonight.

(i won! woo)

tried to kill me by swerving into me cause he heard my vtak:lame:

[Jason.AZ1]

tried to kill me by swerving into me cause he heard my vtak:lame:

Thats more of a alex move swerving into people......
so I call :bs: lol

[Dead Bird]

No he's right.
Except I swerved because my vtec pulls sooo much harder than his and my 1st to 2nd shift spins sooo much.
When i spun, the car swerved.
You know how it is. :)


Alex swerving FTL!

[Dead Bird]

Ha you guys watch.
As soon as i get my license back, and a legal car (registered, insured), and am driving around alot again, the street racing rate in phoenix, and even tucson is gonna sky rocket back up. :)

[Jason.AZ1]

No he's right.
Except I swerved because my vtec pulls sooo much harder than his and my 1st to 2nd shift spins sooo much.
When i spun, the car swerved.
You know how it is. :)


Alex swerving FTL!

I remember first time I raced Alex you said he tends to swerve
I told him if he wrecks into my ek hatch ill fucking kill him.
lmao!!!!!!!!!!!!!!

[OhDang]

I remember first time I race him you said he tends to swerve
I tell him if he wrecks into my ek hatch ill fucking kill him.
lmao!!!!!!!!!!!!!!

this post hurt my head

[Dead Bird]

coconut head?

[Jason.AZ1]

this post hurt my head

:thumbup:

[98dc2]

gave her a half ass bath

[imm0rtal]

my motor started knocking hella bad :(

[mr.lsvtec]

put her back together

[ek9]

parting out diamondlyfe's old hatch :all_coholic:

[Colten79]

put her back together

pics fool!

[osofast]

Walked passed as I left the house.

[Dead Bird]

pics fool!

hypocrit!!!!

[PENTAGRAM_OF_EVIL]

Pulled my engine. No more driving

[turbo_cx]

not a damn thing bc the guy i was going to get my injectors wanted to keep them. anyone have some 750cc to 1000cc for my lsv turbo?

[Colten79]

hypocrit!!!!

hey... you know i dont show anyone my motor..
i'm talking about posting pics of his car (exterior).. i'll post pics of my exterior if you want ahahaha




















DICK!

[98dc2]

tried to park it under a semi traylor, another 1/2 inch lower and it will fit

[KingDingaLing]

put a cross member and steering rack together. came out ok. waiting on new dust covers from honda and new rubber grommets that go around that steering shaft. all new zinc coated bolts also.even stainless dress washers with stainless bolts for those metal spacer blocks

powder coated starlight candy orange btw, no chipping paint bullshit

RC'sGarage what what. lol

http://i231.photobucket.com/albums/ee199/fatshlong/crossmember.jpg

[alexnunez]

wet sanded, polished, and waxed my carbon fiber hood and duckbill

[eghatch]

parting out diamondlyfe's old hatch :all_coholic: i already got the head lights and corners thanks

[eghatch]

put a cross member and steering rack together. came out ok. waiting on new dust covers from honda and new rubber grommets that go around that steering shaft. all new zinc coated bolts also.even stainless dress washers with stainless bolts for those metal spacer blocks

powder coated starlight candy orange btw, no chipping paint bullshit

RC'sGarage what what. lol

http://i231.photobucket.com/albums/ee199/fatshlong/crossmember.jpg
looks sick bro wish you could work on my new eg:thewave:

[KingDingaLing]

looks sick bro wish you could work on my new eg:thewave:

thanks man, why cant i?

[skar1]

put a cross member and steering rack together. came out ok. waiting on new dust covers from honda and new rubber grommets that go around that steering shaft. all new zinc coated bolts also.even stainless dress washers with stainless bolts for those metal spacer blocks

powder coated starlight candy orange btw, no chipping paint bullshit

RC'sGarage what what. lol

http://i231.photobucket.com/albums/ee199/fatshlong/crossmember.jpg

Good stuff man

[98dc2]

got pissed as shit cause some one side swiped it

[HondaFreak]

I threw on a Beaks lower arm bar and a Blackworks shift knob. Got some other goodies waiting...

[hellshock2182]

Yanked the interior and washed out the nasty ass carpet at the car wash. Then put her back together. I'm attempting to drive this bitch to idaho and back here in a day or two.

[KingDingaLing]

converting my car to power windows lol, the first time i did this, didnt want to ever do it again. well, i went to the junkyard and found me a donor ex and got after it. a wrecked car stacked on another car is not a wise way to pull out the needed harnesses, but....its hard as fuck to find a uncut harness complete,

pulled the main harness out and the door harness.

the harness at the very top of this first pic is gonna be my driver harness, ill tear it apart and pull whats needed. the big harness below it is gonna be my donor for the passenger power window harness, wich also needs to be tore apart for what i need

http://i231.photobucket.com/albums/ee199/fatshlong/powerwindow1.jpg


this second pic is just a pic of the driver harness before its tore apart.

http://i231.photobucket.com/albums/ee199/fatshlong/powerwindow3.jpg


third pic is driver and passenger harness complete, all plugged in to the door harnesses, next they need to be installed into the car.

http://i231.photobucket.com/albums/ee199/fatshlong/powerwindow4.jpg


last is all the extra wire.

http://i231.photobucket.com/albums/ee199/fatshlong/powerwindow2.jpg



i wouldnt recommend this to anyone but its the right way to do power windows in a eg. and i fuckin hope this is the last time i do it. ek's are so much easier.

[nolongervtec]

put a cross member and steering rack together. came out ok. waiting on new dust covers from honda and new rubber grommets that go around that steering shaft. all new zinc coated bolts also.even stainless dress washers with stainless bolts for those metal spacer blocks

powder coated starlight candy orange btw, no chipping paint bullshit

RC'sGarage what what. lol

http://i231.photobucket.com/albums/ee199/fatshlong/crossmember.jpg

RC youre a fucken god at clean

[KingDingaLing]

RC youre a fucken god at clean

thanks man, no bullshit here. i spare no expense when it comes to building my own cars.

[Colten79]

got a new obd1 dizzy+ wires...
started installing my a/c.. shit i heard its gonna be gettin up to the 80's this week..

[98dc2]

put full si interior in :)

[cjb]

thanks man, no bullshit here. i spare no expense when it comes to building my own cars.

so know of any other junk yards that will have all the harness? I need to convert to power windows as well.

[KingDingaLing]

so know of any other junk yards that will have all the harness? I need to convert to power windows as well.

naw i sure dont, the one i went to i got lucky and it happend to have it all, wich i almost killed myself trying to get everything out. it was wrecked with a shattered windows and the windsheild was shattered falling onto the dash. pain in the ass. i left with a deep cut and many cuts on my knees and hands. shattered glass all over the carpet and on top of that, it was soaking wet inside. wasnt my idea of fun.


the only place i can say that might have it is ecology. they had quite a few egs there but i dont remember if they had the harnesses in them still or not. i know one still had the dash so you might get lucky, but there were a few EX's

[Zipp]

Washed it!

[98dc2]

drove it to work and back

[Zipp]

New Heaad unit and speakers go in this weekend along with new tint. Now i just gotta find some to install the lowering springs...

[2hipdelsol]

tried to fix my non working cluster lights failing miserably

[1point8]

Drove it ilegally 13 miles.

[Colten79]

^^nice^^ lol

Put Gsr sway bar + LCAs... posts pics tomorrow, its dark..
:bigok:

[1point8]

eh.
Not as big a deal as the law makes it out to be. Oh well.
Hopefully I can sell it and start coming back out on the weekends in a teg!

[BDEG]

I fixed my boost leak and it's driving again pulling hard can't wait for 1point8 to get his car fast so I can spank that ass.

[IS-Frank]

Well I put those "jdm" black house head lights on.....and drove it to work and back I love my ej1

[1point8]

What's it peaking at now?

[BDEG]

Im holding a good 19psi now I love feathering the gas

[1point8]

mmmm Tastey!
Let me drive!
Lets go to the track saturday!
I want calvin to bring his teg so I can get a few baseline runs... but he won't drive it cuz no tags/insurance

[osofast]

Started it and let it idle for a bit.

[OhDang]

mmmm Tastey!
Let me drive!
Lets go to the track saturday!
I want calvin to bring his teg so I can get a few baseline runs... but he won't drive it cuz no tags/insurance

jerk lol

[1point8]

That wasn't even mean!
I want you to bring it.
:(

[LadyLockness]

color i wanted
http://c4.ac-images.myspacecdn.com/images02/117/l_cdfb183b706448bea7c54fc073ff568f.jpg



before
http://c4.ac-images.myspacecdn.com/images02/120/l_5e58d92f96c644119fb89abae38408ab.jpg


and after =]]


http://c3.ac-images.myspacecdn.com/images02/125/l_e3e527b4532346e9969a86a4ba990936.jpg


soooooo happy with it what do u think

[Jason.AZ1]

Who did you get to do it?

[LadyLockness]

macco the one on deer valley they had a special going on

[skar1]

Looks good for a second I thought they converted it into an ek lol

[Colten79]

how much you pay??

[LadyLockness]

well they had the presidential going for 249 and a 100 for the intragrated clear coat and i had 200 worth of body work so bout 685 total!
drive by there sometime all their work looks perfect i had ZERO overspray!
im not sure if the special is still going on but look on craigslist under auto parts

[aaron]

i haven't been on in a long time!
but, i took the back seats out, all rear trim panels, carpet from rear of front seats back, and sound deading
crap off. threw it all away.
also a couple months ago, put lighten fly wheel and new clutch in. as well as a lighten crank pully.
runs great.
now looking for an extra D16z engine
good to be back!
have a great weekend!

[SimTechDJ]

decided to put it up for sale. : /

[skar1]

Got all in that bitch and swept it out and gave her a sponge bath :) interior will go in this week ill be ordering a few goodies for her next week. Also took out every hacked up wire, will be installing fresh harnesses as well.

[IS-Frank]

Well today I washed my ej1 and vacumed it and decided to paint my ls meshes...and adjusted the rear camber a bit and went to the park with it with my kids and wife....that's about it....

[jdmegmarcus]

hahahhaha push my car up tha rest of south monutain it stall at tha top...lmao

[smcdonaldaz]

Picked up nicer door rubber and a sea belt from the JY. Also did the last of the wiring for cruise before I start the wiring to the computer. That's gonna suck.

[Dead Bird]

Sanded the Shitty half-assed rattle can flat black off my hood and revealed a decent coat of oem white paint underneath! :)
Oh and VTEC!!

Hood is white
VTEC isn't black
http://i725.photobucket.com/albums/ww257/regnal10/Civic15.jpg
http://i725.photobucket.com/albums/ww257/regnal10/Civic16.jpg

[dannykhaos]

new shoes
http://img.photobucket.com/albums/v468/mazpunx480/hxs.jpg

[Colten79]

rims look good ^^

got new a/c line cause mine had a little leak... thanks again mr.lsvtec
washed off some bird's skeet skeet...

[KeRmEt]

got new rims and possible blown head gasket or bad water pump lol

http://i750.photobucket.com/albums/xx147/LovemyEK9/My%20Civic/newrims.jpg