PDA

View Full Version : Need help


azjared
01-03-2010, 10:00 PM
So my buddys alarm hasnt worked for a long time so we just unplugged his brain to the alarm, but now his aftermarket deck will not turn on. Anyone know what we need to do to get it to turn on again.

thanks

BigCountry
01-03-2010, 10:27 PM
Sounds like its wired to the alarm?

auex
01-04-2010, 01:18 PM
Let's start with what kind of vehicle?

azjared
01-04-2010, 02:23 PM
4 door ej8 jvc deck i forget the alarm brand, i took the alarm brain out since it wouldn't stop going off and he didn't want an alarm (its just a daily driver).

im guessing its what big country said but we havent taken it apart to look yet. i figured it wouldn't hurt to see if anyone else had experience with this problem for. ill check the deck diagram out in a little see if i can figure it out

Jason.AZ1
01-04-2010, 03:00 PM
you always find away to brake something when working on something haha

auex
01-04-2010, 08:32 PM
Well first thing I would do would be to check the 2 fuses for the radio just incase something blew while messing around under there. If those aren't working then pull the radio out and check for power and accessory at the radio itself. At that point you can see if they used a harness to install or hacked it in.

azjared
01-04-2010, 11:18 PM
fiixed it they didnt have the remote wire hooked up lol

THAT_GUY
01-11-2010, 12:59 PM
Please reinstall the alarm. I don't want to see a thread in 2 weeks about this guys car getting taken. There's a couple people on here (even a vendor) who can help with this if you need it.