b/k series tranny rebuild

[rotneg]

i just rebuilt my tranny and found this very useful
http://www.honda-tech.com/showthread.php?t=2443459

[Agent Smith]

while it's a good right up, there are A LOT of things not covered in this for a proper full rebuild... and do not drop your trans on the ground, you might break the case, use a screwdriver to pry up on the counter shaft to get the c-clip to clip into place.

[rotneg]

figured it was a good starting point, it covers most of the info and it has pictures and instructions. it does lack all the torqure specs required as well as the tolerances honda calls for for gear to gear, gear to synchro, etc. and i personally tapped my case back on with a mallet while spreading the clip.