PDA

View Full Version : Ecu chips ,Ecu Jumper Harness & Distributor Jumper Harness


jgregg
12-10-2010, 12:27 PM
Notorious is now offering a chipping service for obd1 ecu's for $80 and obd0 ecu's for $100

We now offer financing on all purchases over $199. Subject to credit approval. It literally takes two minutes while you wait to see if your approved.

All ECU's Come with a custom Base map for your Setup. This is a base map to get you ready to see a tuner.

We have several ecu's ready to go pricing is as follows.
P06 & P75 Non Vtec ecu's $100
P06 & P75 Converted to run vtec $125
P28 & P72 $150

We also do P05 ,P06 & P75 vtec conversions just call for pricing.

ECU jumper harnesses also available
OBD2B car to OBD1 ecu $60
OBD2A car to OBD1 ecu $60
OBD0 car to OBD1 ecu $80
OBD1 car to OBD2A ecu $95
OBD1 car to OBD2B ecu $95
OBD2A car to OBD2B ecu $95
OBD2B car to OBD2A ecu $95
OBD2 car to OBD1 distributor $45
OBD1 car to OBD2 distributor $45
OBD0 car to OBD1 distributor $45

HONDATA S300 $475
NEPTUNE RTP DEMON $400
FLASH PRO $695 pm for a better price
K PRO $695 pm for a better price
K TUNER in ecu board $499
K TUNER flash $299-$499
AEM EMS & INFINITY call for pricing. To many vehicle applications and pricing variations to list a price on this one.

We offer custom wire harnesses as well as existing wire harness repair. Please pm or call for pricing on these applications. Some examples of custom wiring would be:
DPFI to MPFI (two injector to four injector on a 88-91 civic/crx)
OBD0-OBD1 conversions
H22 into a non accord or prelude vehicle
K Swap harnesses
V6 swap harnesses
Wire tuck
Kill switches
Push botton start
Vtec sub harness
Three wire to two wire idle air control conversions

For those of you that have other vehicles not just a Honda / Acura we offer several programmers such as:
AEM Electronics
AFE Power
Apexi
Banks Power
Bully Dog
Cobb Accessport
Diablosport
Edge
Granatelli
Holley
HP Tuners
Hypertech
Jet Performance
SCT
Superchips
Venom

Sales Line: 602-339-0308
9am-5pm Monday-Friday
for fastest response please call or email Sales@BuiltByNotorious.com

http://i109.photobucket.com/albums/n75/jesseg3420/AZHT/ecusandlids.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/ecu2_zps81041a80.jpg (http://s109.photobucket.com/user/jesseg3420/media/ecu2_zps81041a80.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/AZHT/notoriouschippedecus.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/AZHT/ecu.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/AZHT/zerg1.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/AZHT/zerg2.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/AZHT/zerg3.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/AZHT/zerg4.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/ecuday1_zpsb02d3658.jpg (http://s109.photobucket.com/user/jesseg3420/media/ecuday1_zpsb02d3658.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/ecuday2_zps69f7f90f.jpg (http://s109.photobucket.com/user/jesseg3420/media/ecuday2_zps69f7f90f.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/ecuday10_zps6651dea3.jpg (http://s109.photobucket.com/user/jesseg3420/media/ecuday10_zps6651dea3.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/ecuday12_zps81b2d4cc.jpg (http://s109.photobucket.com/user/jesseg3420/media/ecuday12_zps81b2d4cc.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/ecuday11_zps8fcaf0bd.jpg (http://s109.photobucket.com/user/jesseg3420/media/ecuday11_zps8fcaf0bd.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/ecuday3_zpsf8f51b08.jpg (http://s109.photobucket.com/user/jesseg3420/media/ecuday3_zpsf8f51b08.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/ecuday14_zpsa2da819a.jpg (http://s109.photobucket.com/user/jesseg3420/media/ecuday14_zpsa2da819a.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/ecuday13_zpsc89f834e.jpg (http://s109.photobucket.com/user/jesseg3420/media/ecuday13_zpsc89f834e.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/ecuday5_zps58433113.jpg (http://s109.photobucket.com/user/jesseg3420/media/ecuday5_zps58433113.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/ecuday8_zpsbb75dcca.jpg (http://s109.photobucket.com/user/jesseg3420/media/ecuday8_zpsbb75dcca.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/ecuday9_zps76b7672e.jpg (http://s109.photobucket.com/user/jesseg3420/media/ecuday9_zps76b7672e.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/ecuday6_zpscd1b2dda.jpg (http://s109.photobucket.com/user/jesseg3420/media/ecuday6_zpscd1b2dda.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/ecuday7_zps237eecdf.jpg (http://s109.photobucket.com/user/jesseg3420/media/ecuday7_zps237eecdf.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/install1_zpsnacvlquz.jpg (http://s109.photobucket.com/user/jesseg3420/media/install1_zpsnacvlquz.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/hondata6_zps2cy1kvoc.jpg (http://s109.photobucket.com/user/jesseg3420/media/hondata6_zps2cy1kvoc.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/hondata5_zpsfoomlc8m.jpg (http://s109.photobucket.com/user/jesseg3420/media/hondata5_zpsfoomlc8m.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/hondata2_zpsqipqawmb.jpg (http://s109.photobucket.com/user/jesseg3420/media/hondata2_zpsqipqawmb.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/hondata3_zpsaufcskhk.jpg (http://s109.photobucket.com/user/jesseg3420/media/hondata3_zpsaufcskhk.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/hondata1_zpspwj7dczz.jpg (http://s109.photobucket.com/user/jesseg3420/media/hondata1_zpspwj7dczz.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/hondata4_zpsas0moz3d.jpg (http://s109.photobucket.com/user/jesseg3420/media/hondata4_zpsas0moz3d.jpg.html)

hatch520
12-10-2010, 12:30 PM
what programs do you use for obd1 tuning?

street dreams
12-10-2010, 12:58 PM
We tune on Crome and Hondata.

street dreams
12-14-2010, 08:12 PM
bump

jgregg
12-18-2010, 01:21 PM
all jumper harnesses back in stock !

Daddy_Digital
12-18-2010, 01:57 PM
great price for the NA dyno tune.

jgregg
09-12-2011, 10:22 AM
we have a stack of obd1 vtec ecu's chip and socket already installed. on sale for $140

jgregg
12-19-2011, 09:27 AM
neptune stocking stuffer ? lol

HondaBoy[T]
12-19-2011, 10:19 AM
Good prices. Kenny tunes great, never had a problem.

JdmGuy602
04-10-2012, 01:49 PM
How much for an obd1 to obd2 jumper harness for a b-series

jgregg
04-11-2012, 11:47 AM
How much for an obd1 to obd2 jumper harness for a b-series

OBD1 car to OBD2A ecu $95 *Secondary O2 sensor sub-harness and crank angle sensor built in
OBD1 car to OBD2B ecu $95 *Secondary O2 sensor sub-harness and crank angle sensor built in

jgregg
07-20-2012, 10:03 AM
we have lots of ecu's ready to go....

jgregg
07-20-2012, 11:08 AM
if anyone has friends that are not in the state. we will free ship ecu's within the lower 48 states.

cbaracing
07-20-2012, 01:52 PM
we have lots of ecu's ready to go....

how many exactly? :biggrin:

jgregg
07-21-2012, 01:33 PM
how many exactly? :biggrin:

lots exactly lol

Built By Notorious
07-26-2012, 09:10 AM
At least 15.. ;) BUMP

jgregg
08-28-2012, 10:25 PM
If anyone needs a p28 we still have roughly 7 at the shop. we also have a obd1 p72 if anyone needs it.

jgregg
09-24-2012, 09:08 PM
we have a stack of ecu's at the shop if anyone needs one. or we can chip your existing ecu to your needs.

jgregg
10-08-2012, 08:44 PM
ttt

jgregg
11-12-2012, 04:01 PM
we have a stack of ecu's as usual! pm for pricing of your specific needs

jgregg
02-01-2013, 07:03 AM
We always have ecu's on hand and ready to go. Let us know if you need a ecu or if you just need changes made to your existing chip.

jgregg
06-20-2013, 03:01 PM
ttt

jgregg
06-22-2013, 10:57 AM
Anyone need a ecu?

http://i109.photobucket.com/albums/n75/jesseg3420/ecu2_zps81041a80.jpg (http://s109.photobucket.com/user/jesseg3420/media/ecu2_zps81041a80.jpg.html)

Built By Notorious
07-25-2013, 02:02 PM
price drop!!! Get them while they last!!

LS-S DA9
07-25-2013, 08:21 PM
Obd1 p72(gsr)??

Sent from my DROIDX using Tapatalk 2

Built By Notorious
07-26-2013, 12:25 PM
Obd1 p72(gsr)??

Sent from my DROIDX using Tapatalk 2

Stock or Chipped?

LS-S DA9
07-26-2013, 05:34 PM
Stock or Chipped?

BONE stock..

jgregg
07-30-2013, 10:54 AM
We do not have a stock one sorry. We could make a obd1 vtec ecu with iabs and put a stock map on a chipped one?

91Crx-SiR
07-30-2013, 04:00 PM
Package deals?

jgregg
07-30-2013, 04:03 PM
Absolutely! what are you looking for?

91Crx-SiR
07-30-2013, 05:25 PM
Obdo-obd1 jumper harness, distributor harness
And maybe a p28 or p06. Do you also purchase ecus?
I have a few I don't need

LS-S DA9
07-30-2013, 06:58 PM
We do not have a stock one sorry. We could make a obd1 vtec ecu with iabs and put a stock map on a chipped one?

think im gunna keep looking man. but if i change my mind ill let ya know and it would be without a chip/stock map since i have my own chip/map.

jgregg
07-31-2013, 07:09 AM
Obdo-obd1 jumper harness, distributor harness
And maybe a p28 or p06. Do you also purchase ecus?
I have a few I don't need

yes we do purchase ecu's and we have both of the jumper harnesses you need in stock. Call us after 9am with details of what you have and we will work you a deal. 602-339-0308

jgregg
07-31-2013, 07:11 AM
think im gunna keep looking man. but if i change my mind ill let ya know and it would be without a chip/stock map since i have my own chip/map.

ok no worries. let me know we can turn a p28 or p06 into a p72 style ecu that will do everything the p72 does except look for a knock sensor.

jgregg
09-21-2013, 08:39 AM
we have lots of ecu's in stock. call us with your needs 602-339-0308

jgregg
11-05-2013, 09:03 AM
We are going to be closed for the next few days. Its Sema show time again. We are open until 5pm today. Several jumper harnesses and ecu's in stock.

jgregg
07-08-2014, 10:06 AM
ttt

jgregg
09-20-2014, 10:19 AM
Added new info. Please pm or call 602-339-0308 with any questions

jgregg
01-18-2015, 07:52 PM
We now offer financing on approved credit. Stop by it literally takes 1 min to fill out the application and typically you will get approved while you wait.

jgregg
02-20-2015, 09:47 PM
These are all from the last two weeks. Flawless ecu work....
http://i109.photobucket.com/albums/n75/jesseg3420/hondata4_zpsas0moz3d.jpg (http://s109.photobucket.com/user/jesseg3420/media/hondata4_zpsas0moz3d.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/hondata1_zpspwj7dczz.jpg (http://s109.photobucket.com/user/jesseg3420/media/hondata1_zpspwj7dczz.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/hondata3_zpsaufcskhk.jpg (http://s109.photobucket.com/user/jesseg3420/media/hondata3_zpsaufcskhk.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/hondata2_zpsqipqawmb.jpg (http://s109.photobucket.com/user/jesseg3420/media/hondata2_zpsqipqawmb.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/hondata5_zpsfoomlc8m.jpg (http://s109.photobucket.com/user/jesseg3420/media/hondata5_zpsfoomlc8m.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/hondata6_zps2cy1kvoc.jpg (http://s109.photobucket.com/user/jesseg3420/media/hondata6_zps2cy1kvoc.jpg.html)
http://i109.photobucket.com/albums/n75/jesseg3420/install1_zpsnacvlquz.jpg (http://s109.photobucket.com/user/jesseg3420/media/install1_zpsnacvlquz.jpg.html)

jgregg
04-19-2015, 07:05 PM
bump

jgregg
04-23-2015, 03:29 PM
bump

jgregg
05-23-2015, 09:05 AM
ttt

Nayrb_eg
02-01-2016, 02:59 PM
I'm looking for a price on a OBD1 Vtec ECU with a stock GSR map

king06
02-01-2016, 07:03 PM
Call them. Vendors RARELY get on here anymore.

jgregg
02-02-2016, 09:04 PM
I'm looking for a price on a OBD1 Vtec ECU with a stock GSR map

We have about 70 obd1 ecu's give us a call tomorrow and speak with Nick. 602-339-0308

Nayrb_eg
02-07-2016, 07:34 PM
Thanks for the ECU fellas

LS-S DA9
02-07-2016, 07:50 PM
I'm looking for a price on a OBD1 Vtec ECU with a stock GSR map
Why not get a 94/95 gsr ecu? Lol

Sent from my SM-G900V using Tapatalk

Nayrb_eg
02-08-2016, 07:27 AM
Why not get a 94/95 gsr ecu? Lol

Sent from my SM-G900V using Tapatalk

I couldn't find a 94/95 gsr ecu for less than $250+shipping anywhere so i went this route to get the car rolling until i purchase hondata.

LS-S DA9
02-08-2016, 08:29 AM
I couldn't find a 94/95 gsr ecu for less than $250+shipping anywhere so i went this route to get the car rolling until i purchase hondata.
Holy crap. I bought mine for 80 I think lol

Sent from my SM-G900V using Tapatalk

jgregg
02-08-2016, 08:36 PM
Thanks for the ECU fellas

Anytime. Glad we could help!

jgregg
02-08-2016, 08:37 PM
Holy crap. I bought mine for 80 I think lol

Sent from my SM-G900V using Tapatalk

That ecu is getting hard to find it was only made for two years and that was now 20+ years ago.

LS-S DA9
02-08-2016, 08:44 PM
I know. . I'm not totally stupid.. all obd1 ecu are that old now.

Sent from my SM-G900V using Tapatalk

jgregg
08-08-2016, 07:51 PM
Bump