PDA

View Full Version : Help with passanger kick panel please


civicarlos
02-01-2011, 11:28 AM
Since i bought the car the passanger kick panel was loose and a tried a few times to put it back but no luck :( i cant even remove it i tried to give a good pull but nothing happens, any ideas how to remove and re install it please ...

http://i427.photobucket.com/albums/pp354/civicarlos/Civic%20interior/DSC03811.jpg
http://i427.photobucket.com/albums/pp354/civicarlos/Civic%20interior/DSC03812.jpg

ILIKETODRIVE
02-01-2011, 01:16 PM
Higher up underneath the dash the should be something holding to either another piece of plastic or the chassis itself. Recheck after removing said piece. Just give the panel a good tug straight back and it should come out if there is nothing higher up holding it in.

As far as trying to make it fit properly, check the backside of it after you get it off to see if any plastic tabs/holders are bent/broken. If so, replace the piece.

hotwheelcivic
02-02-2011, 09:52 AM
good info. i was just going to say check the tabs to see if their broken, or if anything was in the way of the clips going in

civicarlos
02-05-2011, 02:09 PM
Higher up underneath the dash the should be something holding to either another piece of plastic or the chassis itself. Recheck after removing said piece. Just give the panel a good tug straight back and it should come out if there is nothing higher up holding it in.

As far as trying to make it fit properly, check the backside of it after you get it off to see if any plastic tabs/holders are bent/broken. If so, replace the piece.

Thank you ill do that :)