fabricated a rear strut bar for my integra

[95.ls.teg]

will post pics later, when it is grinded down and polished.

[DarkAngel]

will post pics later, when it is grinded down and polished.

LOL Ay Caramba..........


:smackself:

[FranktheTank]

Why post with no pics??? :dumbass:

[95.ls.teg]

cause i wanted to tease all of you haha

[Dead Bird]

gay

[robinsonbarba]

^^ x2million..

[nelsmar]

Next time dont even bother posting w/o pics. thats like saying "Look what I go today! ill post pics later..." And never telling us what it is, not to mention 4 days later not posting pics. :D

[Chef]

next time dont even bother posting w/o pics. Thats like saying "look what i go today! Ill post pics later..." and never telling us what it is, not to mention 4 days later not posting pics. :d


^^^ what he said...

[DarkAngel]

Hahaha, ok well .... PICS!

[dragCartel]

no mamen!!!

[Acurazor]

Weak.

[honduh_head]

well this was gay.

[BigCountry]

:lock:

[FranktheTank]

6 days later and you still failed to upload any sort of photo, you suck......

[95.ls.teg]

hah woah woah. lets take it down a notch, i have been busy with school ,work, moving houses. etc. pictures will be up tonight!!!!


sooooooo C.T.F.D.

[RICK's-TOWING]

this thing better be gold

[nelsmar]

this thing better be gold

And Diamond encrusted!

[crxhfb16]

:flush:

[CTD-FAB]

I saw it.

Good for you Dylan, built not bought!!

[honduh_head]

lol @ CTFD.

[95.ls.teg]

I saw it.

Good for you Dylan, built not bought!!



thanks vince!!

[Acurazor]

I saw it.

Good for you Dylan, built not bought!!

I haven't......

[honduh_head]

still waiting...

[B16offuryz]

hah woah woah. lets take it down a notch, i have been busy with school ,work, moving houses. etc. pictures will be up tonight!!!!


sooooooo C.T.F.D.

tonight 4/25? maybe 4/26?? or tooniiteee 4/27? .......... 4/28?

2012?
2013?


........................................
.................................


2030?

[honduh_head]

haha ^

[PENTAGRAM_OF_EVIL]

lol this funny

[Acurazor]

Stupid ass thread

[all_motor_mike]

i really thought i would see pics today with the few new post that were up since i last checked it....... but im let down yet again.


mike

[BigCountry]

Fuck this guy.... Ban for being an asshole who can't post pictures.

[DarkAngel]

Ah fuck it! I call bullshit! CDT-FAB "Vince" only saw a broom stick with chrome duct tape on it with nuts and bolts holding it on!

[BRIZZLE]

hope you shit out of your mouth today

[lx96tegg]

This is such a fail!!!!!!!!

[Acurazor]

Still nothing? LOL gay

[95.ls.teg]

well after all of the shit talking, here you go you fucking douche bags haha!! if any of you wonder why it took so long, unlike most people. i dont check this forum every day. but since im getting on today i figured i'd upload the pictures.

its not polished yet. its a work in progress. but here ya go


http://i52.tinypic.com/fp55xk.jpg

http://i53.tinypic.com/3142cnl.jpg

http://i54.tinypic.com/2cp9w5v.jpg

http://i55.tinypic.com/2me3huo.jpg

http://i54.tinypic.com/oibuar.jpg

http://i54.tinypic.com/vhvl1x.jpg

[Dead Bird]

finally jesus christ.

Coulda been worse though I guess.

Gives me an Idea at least

[95.ls.teg]

im going to make a couple more, so if anyone wants one PM me. not sure how much i'll sell them for. but i wont jew you!! haha

[AFFIRace]

I think I'm going to throw up. Jus kiddin. Vince told me you said you weren't even going to post a pic. I'm glad you did and I must say its cool you built it yourself and it turned out good. I like the pic of it by itself.

[95.ls.teg]

I think I'm going to throw up. Jus kiddin. Vince told me you said you weren't even going to post a pic. I'm glad you did and I must say its cool you built it yourself and it turned out good. I like the pic of it by itself.



haha ahhh come on aaron its not bad for being buily out of scrapp metal and 1 hour. but thanks. i think im going to cutt off the extra part of the mount that goes around the strut cap.make it some half moon mounts.

[gunsup0331]

looks pretty decent for a first attempt. not a fan of the gigantor cutouts you made tho lol

[95.ls.teg]

out of the plasitcs?

[DarkAngel]

Its a good start. I like it. I would hit you up on one but my Amp, Extinguisher, etc is right at the level of the bar.

[95.ls.teg]

yeah my sub is where it is because my power cable is so short.

[95.ls.teg]

DarkAngle now has one of these strut bars on his car!!!!

[intenseneal]

You know they do make these. I have a Skunk2 rear strut bar that actually works lol.

[DarkAngel]

You know they do make these. I have a Skunk2 rear strut bar that actually works lol.

Hmmm maybe I should have gone this route instead...... LOL :smackself: Some people fail to see the point.

Thanks 95.ls.teg. Its actually pretty light and the picture is deceiving on the weight of it. Does the job though. Thanks again. I like when something looks like it was home built, in my opinion gives it character and its not the norm from what everyone buys in the aftermarket world. To each their own. Still have not painted it though. Waiting for today or tomorrow to finish it up.

[VTECin5th]

Well, he delivered guys.. and I'll be honest. I was expecting much much much worse. This looks very decent. Keep it up man, start small and work your way up to bigger things. Looks good overall.

[civic nerd]

Looks alright. I would have went tubular though. Lol But nice job!

[95.ls.teg]

Hmmm maybe I should have gone this route instead...... LOL :smackself: Some people fail to see the point.

Thanks 95.ls.teg. Its actually pretty light and the picture is deceiving on the weight of it. Does the job though. Thanks again. I like when something looks like it was home built, in my opinion gives it character and its not the norm from what everyone buys in the aftermarket world. To each their own. Still have not painted it though. Waiting for today or tomorrow to finish it up.



No prob man. hah you and i are the only ones with this bar so far. and yeah its really light weight and supper stiff. no flex in it what so ever. i still havent fully polished mine. hah

[95.ls.teg]

You know they do make these. I have a Skunk2 rear strut bar that actually works lol.


yeah i know that many companies make them and they cost around 80 -200 $$$ or something like that. But i made my own that works exactly the same if not better. if you grab my strut bar and pull on it / shake it there is no flex in it what so ever. i pulled and shook on a friends strut bar, not sure what brand, and the metal had a little movement in it. i didnt like that.

[ineedvtec]

Homemade parts just look cooler I think. I made a rear lower tie bar and front strut bar for mine! Need to make one of these next.

[PENTAGRAM_OF_EVIL]

That came out good. Nice work.

[95.ls.teg]

thanks ! glad people like it. only 2 of them out there! one is mine, and dark angel has the other