jdm d16zc vtec swap into del sol

[flushek]

ok so im putting the jdm z6 motor into my del sol but im having a few issues. the motor cranks its getting fuel and spark. still thinking its timing (installed arp head studs). anyway if anyone can give me a hand i would def appreciate it. anything else someone could think out input is welcome. thanks

oh the motor is from hmo and it going in a del sol

[MannyaK]

You didnt even post the issue

[flushek]

the motor isnt starting, so little vague. i have another problem. im wiring vtec into my harness and on the motor side of the harness 'cannon plug' there is nothing in the slot so thats fine, but on the firwall/ecu harness side the plug has a orange and wite wire. same in the ecu plug. also were the pressure solinoid goes there is a orange and black wire. can i just pull them out since its not going to anthing?

[flushek]

nvm got it. still isnt starting though

[flushek]

got it. either the coil or the igniter was bad in the dizzy

[MannyaK]

is it good now or are you still in the process of figuring it out

[flushek]

Nah man got it. Just finishing up return line and putting rest of suspention on. Thanks though