lsv block

[95_B18b1_Teg]

i have a pr4 rods with p73a pistons for my lsv build
will they work on the b18a1 block with no issues such as clearances or anything else? and what rings should i use? ls or type r? and what ecu should i use?
theyre both 81 mm right, so would that mean all 81mm b series can use the same rings or no?
also as i was wondering if 310cc injectors were fine or if i need bigger ones due to the cr,

[95_B18b1_Teg]

anyone?

[Agent Smith]

Bore it out and get oversized pistons with rings, many stock bore 81mm rebuilds fail.
310's are enough, might need a fpr but I doubt it.
Chipped ecu with a dyne tune.

[EK 9]

X2 spend the extra cash and go 81.50 most blocks have at least 100k miles... Could be put of round ect...

[Mr.Burner]

Oversize and bore, your motor will last longer then a month.