PDA

View Full Version : clutch slave cylinder and clutch master cylinder went bad...

8 g3n SI az
10-08-2011, 01:18 PM
how and wats the esiest way to find and fix the proiblem... i have an 08 honda civic si..... please help...
CAPTAIN CAAAAAAAVEMAN
10-08-2011, 11:36 PM
take it to dealer, give em key, say fix it
Jocelyn
10-08-2011, 11:46 PM
no way an 08 u have that problem
failedabortion
10-11-2011, 12:27 AM
no way an 08 u have that problem

And why is that?
FranktheTank
10-12-2011, 11:37 PM
ill bet 95 bucks that the slave is fine.
There is a TSB out for the plunger seal in Clutch masters cylinder. they begin to leak and not hold good pressure. WHich makes the pedal soft and squeak sometimes.

Easiest solution to the problem, Omni Power Clutch master cylinder for $130 or so bucks
CAPTAIN CAAAAAAAVEMAN
10-13-2011, 03:03 PM
if there is a TSB doesnt that mean the dealer will fix for free?
8 g3n SI az
10-16-2011, 05:14 AM
What exactly do you mean hella lost... Never really worked with 8 gen...
FranktheTank
10-16-2011, 12:48 PM
if there is a TSB doesnt that mean the dealer will fix for free?

no ( yes if the car is still under warranty)

What exactly do you mean hella lost... Never really worked with 8 gen...

its the clutch master cylinder. this is what you need
http://omnipowerusa.com/product.asp?P_ID=132
Whiteman51x
10-16-2011, 08:29 PM
id check to see if its under warranty first, then ask of there is a recall, if not, it shouldnt be hard to fix, and i dont see anybody charging you a large amount to do it.
Bruticus
10-29-2011, 08:49 AM
I would roll with the omnipower unit, all honda is doing is replacing with th same part,it will fail again, I blew 2 master cylinders in a 45 day span.
Sherwin
11-11-2011, 11:00 PM
Im rockin an omni power made a big difference on my shifting and don't have no issues did it in my 2 door and did it in my 4 door.