jgregg
10-26-2011, 08:40 PM
NEPTUNE RTP DEMON
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/demon4.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/NepTune.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/1nep.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/nep.jpg
This package includes one Demon unit (Pictured above) and one software license for the NepTune RTP software backed by our 100% satisfaction guarantee. Read below for details on our satisfaction guarantee.
Enjoy access to these great features of the NepTune RTP software (Pictured Below):
Beautiful 3D Beveled interface.
User Friendly Toolbars with the options you need most.
Real-Time Datalogging Of Sensor Data, Inputs, Outputs, and ECU Data.
On Board Logging With Lossless Compression To Allow 3 To 5 Times The Regular Amount Of Data To Be Recorded. Offers Up To 12 Hours Of Datalogging Time With Compression Enabled.
Datalog Playback, Save, and Export to CSV.
Datalog Trimming.
Datalog Commenting For Later Review or Sharing With A Tuner.
Graphing Of Sensor Information With Real-Time Values and Live Scrub (Dragging with mouse).
Live Graphing Of Real-Time Sensor Trends.
Direct Serial Logging From LC-1, LM-1, and LM-2 Products (LM-2 currently requires connecting hardware to allow legacy serial connectivity).
Map Trace and Lambda Trace.
24x24 Ignition and Fuel Maps For Precise Tuning.
Dual Tables For Low/High Boost, Different Fuels, or Alpha-N (ITB) Tuning.
Easy Injector Sizing.
Fuel Trims for Cranking, TPS Tip-In, Post Start, and Individual Cylinders.
Rev Limiter with Fuel Cut, Ignition Cut, or Both.
Rev Limits Per Gear.
Launch Control (2-step) With Anti-Lag.
Full-Throttle Shift.
Use The Check Engine Light As A Shiftlight With Different RPM Settings Per Gear.
Idle Adjustments for Idle Speed, Idle Speed vs ECT, and Idle Ignition Corrections.
Air Temp Corrections.
Water Temp Corrections.
Gear Based Fuel and Ignition Corrections.
Access To Many Other Stock Fuel and Ignition Adjustments.
PWM Boost Control With Simple, Boost By Gear, and Gear vs RPM Modes.
Quad Stage Boost Control.
Adjustable Prime Duration At Key On.
Overheat Protection.
Closed Loop Control With Selectable O2 Input, Conditions, and Wideband Support.
Anti-Theft feature requires inputs or a code to be entered with TPS and Brake pedal. Also has a valet/fallback mode with adjustable rev limit.
2 Multi-purpose Outputs With Fuel and Ignition Adjustments.
1 Multi-purpose Output With Multiple Output Settings Based On MPH.
4 Programmable Analog Inputs For Extra Sensors.
And A Lot More!
NEPTUNE RD1
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/tvrd1layout1.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/tvrd1layout2.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/tvrd1layout3.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/tvrd1layout4.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/notoriousrd1.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/rd1eg.jpg
Install It Anywhere In Your Dash, Cluster, Or Any Other Spot You Can Think Of.
Includes TunerView Unit, Barrel Power Connector With Bare Leads (Power And Ground), USB Cable, Data Cable, 4 Screws/Nuts, And Buttons With Quick Attach Plugs.
5x3" Black And White Display (4.7x2.5" Active Area).
Fully Configurable Layouts With RD 1 Drag And Drop Design Software. Add Gauges, Bar Graphs, Text Items, And Lights Anywhere On The Screen.
Multiple Layout Pages.
Export And Share Layouts In The Online Community.
Odometer Support With Programmable Base Mileage And Trip Odometer.
Menu System With Easy Access To Settings And Features.
Warnings Above or Below A Set Threshold That Flash The Screen, Flash The Individual Item, Or Flash Both At The Same Time.
Supports NepTune, NepTune RTP (Original and Demon), Hondata S300, Hondata K-Pro, eCtune (Demon And CN2 Port), Crome (CN2 Port, No Demon), And AEM EMS.
Upgradable Firmware For An Expanding Featureset.
Daisy Chain Multiple TunerView RD 1 and TunerView II LCDs To Display Different Data At Once. (Excludes AEM)
Datalog Through The TunerView With NepTune, NepTune RTP, eCtune, Crome (Crome Pro).
Backlight Adjustment.
Sleep Mode.
Disable Injectors For Security (NepTune RTP Only).
Peak Values.
Settings For Celsius And KPH.
Check Codes On All OBD1 Systems, Clear Codes On All Except eCtune Demon. K-Pro Supports Clearing Codes Only.
BlueTooth Wireless Add-On Available For Wireless Setup And Datalogging.
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/demon4.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/NepTune.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/1nep.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/nep.jpg
This package includes one Demon unit (Pictured above) and one software license for the NepTune RTP software backed by our 100% satisfaction guarantee. Read below for details on our satisfaction guarantee.
Enjoy access to these great features of the NepTune RTP software (Pictured Below):
Beautiful 3D Beveled interface.
User Friendly Toolbars with the options you need most.
Real-Time Datalogging Of Sensor Data, Inputs, Outputs, and ECU Data.
On Board Logging With Lossless Compression To Allow 3 To 5 Times The Regular Amount Of Data To Be Recorded. Offers Up To 12 Hours Of Datalogging Time With Compression Enabled.
Datalog Playback, Save, and Export to CSV.
Datalog Trimming.
Datalog Commenting For Later Review or Sharing With A Tuner.
Graphing Of Sensor Information With Real-Time Values and Live Scrub (Dragging with mouse).
Live Graphing Of Real-Time Sensor Trends.
Direct Serial Logging From LC-1, LM-1, and LM-2 Products (LM-2 currently requires connecting hardware to allow legacy serial connectivity).
Map Trace and Lambda Trace.
24x24 Ignition and Fuel Maps For Precise Tuning.
Dual Tables For Low/High Boost, Different Fuels, or Alpha-N (ITB) Tuning.
Easy Injector Sizing.
Fuel Trims for Cranking, TPS Tip-In, Post Start, and Individual Cylinders.
Rev Limiter with Fuel Cut, Ignition Cut, or Both.
Rev Limits Per Gear.
Launch Control (2-step) With Anti-Lag.
Full-Throttle Shift.
Use The Check Engine Light As A Shiftlight With Different RPM Settings Per Gear.
Idle Adjustments for Idle Speed, Idle Speed vs ECT, and Idle Ignition Corrections.
Air Temp Corrections.
Water Temp Corrections.
Gear Based Fuel and Ignition Corrections.
Access To Many Other Stock Fuel and Ignition Adjustments.
PWM Boost Control With Simple, Boost By Gear, and Gear vs RPM Modes.
Quad Stage Boost Control.
Adjustable Prime Duration At Key On.
Overheat Protection.
Closed Loop Control With Selectable O2 Input, Conditions, and Wideband Support.
Anti-Theft feature requires inputs or a code to be entered with TPS and Brake pedal. Also has a valet/fallback mode with adjustable rev limit.
2 Multi-purpose Outputs With Fuel and Ignition Adjustments.
1 Multi-purpose Output With Multiple Output Settings Based On MPH.
4 Programmable Analog Inputs For Extra Sensors.
And A Lot More!
NEPTUNE RD1
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/tvrd1layout1.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/tvrd1layout2.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/tvrd1layout3.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/tvrd1layout4.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/notoriousrd1.jpg
http://i109.photobucket.com/albums/n75/jesseg3420/NEPTUNE/rd1eg.jpg
Install It Anywhere In Your Dash, Cluster, Or Any Other Spot You Can Think Of.
Includes TunerView Unit, Barrel Power Connector With Bare Leads (Power And Ground), USB Cable, Data Cable, 4 Screws/Nuts, And Buttons With Quick Attach Plugs.
5x3" Black And White Display (4.7x2.5" Active Area).
Fully Configurable Layouts With RD 1 Drag And Drop Design Software. Add Gauges, Bar Graphs, Text Items, And Lights Anywhere On The Screen.
Multiple Layout Pages.
Export And Share Layouts In The Online Community.
Odometer Support With Programmable Base Mileage And Trip Odometer.
Menu System With Easy Access To Settings And Features.
Warnings Above or Below A Set Threshold That Flash The Screen, Flash The Individual Item, Or Flash Both At The Same Time.
Supports NepTune, NepTune RTP (Original and Demon), Hondata S300, Hondata K-Pro, eCtune (Demon And CN2 Port), Crome (CN2 Port, No Demon), And AEM EMS.
Upgradable Firmware For An Expanding Featureset.
Daisy Chain Multiple TunerView RD 1 and TunerView II LCDs To Display Different Data At Once. (Excludes AEM)
Datalog Through The TunerView With NepTune, NepTune RTP, eCtune, Crome (Crome Pro).
Backlight Adjustment.
Sleep Mode.
Disable Injectors For Security (NepTune RTP Only).
Peak Values.
Settings For Celsius And KPH.
Check Codes On All OBD1 Systems, Clear Codes On All Except eCtune Demon. K-Pro Supports Clearing Codes Only.
BlueTooth Wireless Add-On Available For Wireless Setup And Datalogging.