Ek Rear Disc Conversion

[azjared]

My google skills are lacking tonight anyone got a link to a tutorial/diy on this

all i came up with that was useful so far was this link

http://honda-tech.com/showthread.php?t=641639&page=4

[Sound=vibration]

It's pretty straight forward. Everything just unbolts and the sneak cable slide out.

[RomanRod]

"Here's what you need to make it the EASIEST pain-free install:

1. 93-97 delsol or 94-01 integra or 99-00 Si or "some" 92-95 Civic Si trailing arm assembly. 2. delsol/Si rear brake lines (if you use integra trailing arms/calipers you need INTEGRA brake lines...they have a COMPLETELY different caliper attachment that WILL NOT work with delsol/si calipers). 3. 99-00 Si Emergency brake lines (integra lines will work but they come together into a single rubber floorpan grommet which you'll have to hack up and you could hear wind noise, etc under the carpet). 4. 99-00 Si Master cylinder/proportioning valve (you can go with integra parts but you'll have to flare lines, etc) the Si stuff is drop in."



That's from the thread you just posted,.and all over google it seems like it's mostly people asking about what to do rather than write UPS