Mayhem Metal Werkz

[disfunctionalEF]

Hey guys, I've been doing some fab work for a little bit now just figured I'd put a name to go with the work. Hope you enjoy!

Like us on Facebook!http://www.facebook.com/MayhemMetalWerkz

Full-size radiator tuck
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0086.jpg

Custom water neck
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0088.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0087.jpg

Full-sze battery tray
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0089.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0090.jpg

Catch with twin filters, dual -10 ins, single -10 return, and built in baffle
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0188.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0189.jpg

Custom made endtanks
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0208.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0206.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0207.jpg

Dual dumps
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0237.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0238.jpg


http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0236.jpg

[disfunctionalEF]

Teague Speed Racing's 9 sec Civic hatch

Bumper/intercooler mounting bar
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0626.jpg

Mounting the Full-Race intercooler
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0632.jpg

Quick little radiator mounting tab
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0645.jpg


http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0651.jpg

[Orange Sherbert Ice Cream Bar]

nice work..

[disfunctionalEF]

Locash Racing's 8 sec Integra


http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0302.jpg

New upside-downpipe
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0308.jpg

Upside-downpipe heat sheild
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0307.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0304.jpg

16v battery mount
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0309.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0310.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0311.jpg

Bumper mount/Bash beem
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0315.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0313.jpg

New hot-side pipe for the Kinsler Race intake manifold
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_1021.jpg

[all_motor_mike]

Nice work sir! are u an ex employee of full race like alot of the other fabbers who branch off and start they're own deal? Where do u work out of?


Mike

[DarkAngel]

Nice work. I love the radiator tuck and the dual WG setup. Looks real sweet. There are several times when I wish I had the radiator tucked away like that and /or removable from the bottom like many cars out there.

[disfunctionalEF]

Nice work sir! are u an ex employee of full race like alot of the other fabbers who branch off and start they're own deal? Where do u work out of?


Mike

Thank you! Actually, I am a current employee at Full-Race. I've been there almost 6 years now and I've learned as mich as I could from all the greats that have gone on to start their own things. I do the majority of my side work out of Teague Speed Racing with the help of a good friend Aaron.

[B16offuryz]

Your very cute! and I love your work!


Shorty

[sparker]

Nice werk all the way around.

[disfunctionalEF]

nice work..

Thank you.


Nice work. I love the radiator tuck and the dual WG setup. Looks real sweet. There are several times when I wish I had the radiator tucked away like that and /or removable from the bottom like many cars out there.

Thanks! Yeah, we ended up tucking the radiator because there was no room for a full size radiator when running a ram horn style manifold but it came out nice and the ower of the car likes it.

[disfunctionalEF]

Your very cute! and I love your work!


Shorty

Why thank you Shorty! :slaphands:


Nice werk all the way around.

Thanks.

[all_motor_mike]

Its funny everytime u see good fab work on here from an individual, they have a back ground that includs FR in most cases. Keep up the good work sir.


Mike

[disfunctionalEF]

Its funny everytime u see good fab work on here from an individual, they have a back ground that includs FR in most cases. Keep up the good work sir.


Mike


Well I'll try my best to keep that reputation of good fabricators that have worked/work at FR, haha.

[RICK's-TOWING]

nice work as always man!

[KingDingaLing]

No pics of jakes car denman. Sad right now lol

[disfunctionalEF]

nice work as always man!

Thank you Rick!


No pics of jakes car denman. Sad right now lol

Oh you be patient RC! Haha.... I still have some photos to get off my phone and Jake's car is in those photos. I'll put them up shortly.

[PENTAGRAM_OF_EVIL]

Looks good.

[disfunctionalEF]

Some work I did on Jake Blackman's 8 sec Civic SI


Front end and intercooler mounting
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0881.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0880.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0865.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0983.jpg


Dual backdoor setup and 3" Vibrant tubing with Vanjen clamps
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0955.jpg

16v battery tie down
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0956.jpg

Upside-downpipe heat shield
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0285.jpg

-16 crank case vent on oil pan
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0281.jpg


http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0988.jpg

[all_motor_mike]

Is that jakes most recent setup? Looks sick!


Mike

[disfunctionalEF]

Is that jakes most recent setup? Looks sick!


Mike

Thanks Mike, and yes that is Jake's new setup.

Here are a couple more
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0984.jpghttp://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0985.jpg


Here is a car I had a little bit ago that I made a turbo setup for
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0061.jpghttp://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0062.jpg

[lsvtecdc2]

Wow nice clean work there ALL SETUP'S LOOK GOOD

[disfunctionalEF]

Wow nice clean work there ALL SETUP'S LOOK GOOD

Thanks


Here is a storage room door I made for a friend
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0730.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0729.jpg



Sorry for all the older finished projects with not so good photos but I will be working on and posting up new things very soon!

[PENTAGRAM_OF_EVIL]

Thats looks like a badass storage room..
Old pics and projects are good, shows us what you have done and your progress.

[disfunctionalEF]

Thats looks like a badass storage room..
Old pics and projects are good, shows us what you have done and your progress.

Thanks man. I'll do my best to stay on top of posting up my progress with new projects!


Big thanks to Rob at Stickerlab for my first batch of stickers! Anyone want one?

http://i1154.photobucket.com/albums/p537/MetalWerkz/photo4.jpg

[ICD]

Kinsler is looking super sexy

[disfunctionalEF]

Kinsler is looking super sexy

Magnesium intake manifold FTW!

[disfunctionalEF]

Got to weld a V band on a Turbine housing for the first time the other day. Come out alright in my opinion.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo7.jpg


Also made a nice little stainless steel foot rest for a Honda Ruckus. Thinking about making more and different styles if anyone is interested.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo5.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo6.jpg

Have some little projects non car related coming up that I pretty excited about. Will keep updating this thread as they happen.

[ICD]

How much to make this set up

http://i621.photobucket.com/albums/tt298/id2358/4cbaf9ab.jpg

[disfunctionalEF]

How much to make this set up

http://i621.photobucket.com/albums/tt298/id2358/4cbaf9ab.jpg
PM'd

[disfunctionalEF]

Had a little fun by having my iphone in my helmet while welding...


http://i1154.photobucket.com/albums/p537/MetalWerkz/th_IMG_0754.jpg (http://s1154.photobucket.com/albums/p537/MetalWerkz/?action=view&current=IMG_0754.mp4)

[disfunctionalEF]

Got to do a little work over the weekend at a friends house. Built a frame for a carport that he can park his weekend car under.

2" 16ga box tubing. About 24' long 8.5' wide and 6.5' tall on the lower side.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo9.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo11.jpg

Car that gets parked underneath, 64 Bel Air.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo10.jpg

Also going to be working on extending some trailer ramps for Locash. So stay tuned!
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo8.jpg

[AFFIRace]

Love the thread buddy! I can't wait to see a woo woo whistle tip install.

[Dead Bird]

http://www.youtube.com/watch?v=n79jSzKA0L8

[ICD]

We want that woooo wooooooo

[disfunctionalEF]

Yeeeeeeh! I got it on my car!

Sorry guys been kinda busy but I do have some updates!


Finished those ramp for Locash's trailer.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo13.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo14.jpg


And I've been working on a product that I'd eventually would like to mass produce. Don't want to give away too much info but here is a sneak peek!
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo15.jpg


Also want to make some parts for my personal vehicle so I picked this up for mock up.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo18.jpg

[failedabortion]

Some sort of adjustable mount or upper rear control arms?

[disfunctionalEF]

Some sort of adjustable mount or upper rear control arms?

Close guess. Once I revise the original prototype I will post up actual picture's and some more info.

Did a little bit of work recently.

Radiator tuck on TSR's EK Hatch.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo19.jpg
Modified the upper end for better fitment under the core support.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo22.jpg
New lower radiator tabs made to fit with Full-Race traction bar.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo21.jpg

Customers EM1.

Mounting another Full-Race intercooler.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo4-1.jpg
Weld in threaded incerts.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo51.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo1.jpg
Needed minor modifications for the C-West bumper to fit.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo11-1.jpg


Dump tube for the Full-Race B-series AC kit.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo32.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo5-1.jpg

AC condenser remounting.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo2.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo41.jpg

[Bluefernandoruiz]

nice thread

[sofresh]

How much do you charge for a front brace setup like the one on the red civic posted? However, to mount OEM bumpers, fenders. But enough support to brace my tucked FMIC/Radiator combo?

[MADEGO]

I saw that full race kit on the blue si, Friday, looks really good.

[ph8ed4life]

Sick shit, man!!!

[disfunctionalEF]

How much do you charge for a front brace setup like the one on the red civic posted? However, to mount OEM bumpers, fenders. But enough support to brace my tucked FMIC/Radiator combo?
PM'd


nice thread


I saw that full race kit on the blue si, Friday, looks really good.


Sick shit, man!!!
Thanks a lot guys!

[failedabortion]

Do they not make a trick tab in that size?(lower radiator mounts)

[sofresh]

I'm going to send you a message on Facebook early tomorrow morning in response to your PM. Too tired to explain what I have in mind right now lol

[disfunctionalEF]

Do they not make a trick tab in that size?(lower radiator mounts)
That is a Full-Race bar and they do not make radiator mounting tabs like that.

I'm going to send you a message on Facebook early tomorrow morning in response to your PM. Too tired to explain what I have in mind right now lol
Got your message and responed.

[PENTAGRAM_OF_EVIL]

How much do you charge for a front brace setup like the one on the red civic posted? However, to mount OEM bumpers, fenders. But enough support to brace my tucked FMIC/Radiator combo?

Also looking for something like this

[failedabortion]

That is a Full-Race bar and they do not make radiator mounting tabs like that.


Got your message and responed.

Would something like this work in its place?

http://sdhqoffroad.com/tricktabslong.aspx

[tttalon]

that is funny, is that on tsr's car

http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0645.jpg

[TSRaaron]

Nice work! Now finish my car.

[EFfective]

Great video!

[sofresh]

Replied to your message on FB.

I look forward to seeing your work :wave1:

[disfunctionalEF]

Hey guys, took a little time off but now I'm back! Lets try an get back in it...

Also looking for something like this
PM'd

Would something like this work in its place?

http://sdhqoffroad.com/tricktabslong.aspx
Yeah that should work. We just had some sheet metal laying around that we bent up and used.


that is funny, is that on tsr's car?
Haha. Yeah it was but we are redoing his cooling system so no silly quick little tab. :-(


Nice work! Now finish my car.
Ah... Never?

Great video!
Thanks!

Replied to your message on FB.

I look forward to seeing your work :wave1: Good luck on your car!

Got Teague's EK back from RC's and continued working on the new cooling system. New paint looks great thanks to RC and his team.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo23_zpse8d25cf2.jpg
Made a new waterneck and mount coming out of the motor. http://i1154.photobucket.com/albums/p537/MetalWerkz/photo13_zps2c588353.jpg
Photo Bomb by Locash!... ass.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo33_zps90bdb4bd.jpg


Mocked up some radiator hoses with some 1.25" aluminium pipe for a EG.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo24_zpseba45bb4.jpghttp://i1154.photobucket.com/albums/p537/MetalWerkz/photo14_zpsad40aca4.jpg

[Rufus]

Thanks


Here is a storage room door I made for a friend
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0730.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/IMG_0729.jpg



Sorry for all the older finished projects with not so good photos but I will be working on and posting up new things very soon!

Hey you know Steve. We used to race BMX together.

[disfunctionalEF]

Hey you know Steve. We used to race BMX together.Sweet! Yeah Steve is my old co-worker/roommate. Do you still mess around on little kids bikes? Haha.

[Rufus]

I do! My son actually just got home from Friday night races. I still have an Intense 20".

On a fab note what would you want to fab a muffler delete on my sc400? Just straight pipe on each side (axle back).

[disfunctionalEF]

I do! My son actually just got home from Friday night races. I still have an Intense 20".

On a fab note what would you want to fab a muffler delete on my sc400? Just straight pipe on each side (axle back).

Sure! I'd love too. Just shoot me a email MayhemMW@gmail.com or you can reach me on my cell at 480 284 9175 and we can set something up.

[disfunctionalEF]

Made a tow hitch for my ladie's friend. I think it came out pretty cool.


http://i1154.photobucket.com/albums/p537/MetalWerkz/photo25_zpsdad2c9db.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo34_zpsb5e68ac9.jpg

Also did a quick intercooler mount on a eg.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo35_zps32613a16.jpg
Tried to tuck it up in and as close to the core support as I could.
http://i1154.photobucket.com/albums/p537/MetalWerkz/photo16_zpsf778f660.jpg

Will get photos of intercooler with bumper on next time I'm at the shop.

[disfunctionalEF]

Once again I apologize for the lack of photos posted. Rather than give you my excuse I'll just act like it never happened....

I continued work on the blue EM1 with the Full-Race B-Series A/C kit. This time I mounted up a fan on the A/C condenser and also made a custom fan shroud for the radiator.

http://i1154.photobucket.com/albums/p537/MetalWerkz/F9CA1BE2-0C5D-4E58-B19F-D99913CFDE7B-1011-000000B9850EF751.jpg

http://i1154.photobucket.com/albums/p537/MetalWerkz/06C1A058-548A-4632-8B2D-9C4AA2420C1D-1011-000000B9DAD0C9E3.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/84EFC452-3E87-4B3A-8126-4F8541686427-1011-000000B99B1D5325.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/E7A2D425-F6EA-4BA2-8CAE-ACD8D8A5035C-1011-000000B9739EC30B.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/704C66B7-46B6-402C-B4C2-62A3B5696802-1011-000000B957FAFC39.jpg

[Fresh_manny21]

Good shit

[disfunctionalEF]

Good shit

Thanks Manny! Your car is look good, man. Hopefully I'll get to work on it sometime in the future.

More pictures! I just finished some work on a turbo Ep3.

Here is a quick little catch I made from some 3" aluminum tubing.
http://i1154.photobucket.com/albums/p537/MetalWerkz/A91E6FA7-B032-41A6-8A01-BFC093B4FEDA-1011-000000B943816327.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/693585E4-FD32-498B-81F4-3767A133455E-1011-000000B8D0764E0D.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/2460AE4D-4CE7-445E-AD07-FE22906CA2B5-1011-000000B8C2527168.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/812B46E4-9AB5-4C5A-A558-96131FAC7DF3-1011-000000B8EAFD6255.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/7C3847BA-3DD9-43C6-A1DE-81FF310AF1CB-1011-000000B906715B2F.jpg

Also did a short 4" intake.
http://i1154.photobucket.com/albums/p537/MetalWerkz/8AB8A8E3-2DED-4BF9-85C8-D7FDFAE6FD59-1011-000000B8B2431742.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/FC38775F-AD1E-45CF-9C36-211C4BD1C416-1011-000000B8A0F1A079.jpg
http://i1154.photobucket.com/albums/p537/MetalWerkz/AB07E71E-044E-42D2-B9B9-000D5BF4291E-4220-0000055397DC960A.jpg

[disfunctionalEF]

Made a revised throttle cable bracket for Jake Blackman's Em1 today.
http://i1154.photobucket.com/albums/p537/MetalWerkz/89AA831F-15B3-4B13-B36D-DF28B0BC5E85-5836-000007358B218D9C.jpghttp://i1154.photobucket.com/albums/p537/MetalWerkz/6E4DB9DA-0C32-4A7A-8044-7F16911D879B-5836-0000073551001236.jpghttp://i1154.photobucket.com/albums/p537/MetalWerkz/AB0DF516-240B-4688-BF15-9B94A5F9A81A-5836-00000735A5BEBB5F.jpghttp://i1154.photobucket.com/albums/p537/MetalWerkz/C30A4BF2-EA14-4E16-B1EA-DB61FFCEC621-5836-00000736E6B048AF.jpg

[honduh_head]

looking good man

[disfunctionalEF]

looking good man

Thank you!

Congrats to Jake Blackman (indub) for being featured in the most recent Honda Tuning Mag! Car looks spectacular!

http://i1154.photobucket.com/albums/p537/MetalWerkz/D2B21FC0-146C-4F41-A7B1-2CDA7C0C0688-7360-000008DCA43D6797.jpg

[all_motor_mike]

jealous! one day i will work on a car that makes magazines lol.


mike

[Hellsinki]

wow, just checked out these guys' work on their facebook page.. amazing craftsmanship.

[disfunctionalEF]

jealous! one day i will work on a car that makes magazines lol.


mike
Lol, not sure how it happened but somehow I was lucky enough to be at the right place at the right time to be able to help out on Jake's car. Extremely happy to be part of something like this.

wow, just checked out these guys' work on their facebook page.. amazing craftsmanship.
Thank you very much for the kind words.

[disfunctionalEF]

Did some work on a black EK coupe. Custom end tanks, intercooler mounting, and charge piping.


http://i1154.photobucket.com/albums/p537/MetalWerkz/3A32E32C-6EFA-4546-848C-7D00C83FE7B2-3331-000003A0875B9FBD.jpghttp://i1154.photobucket.com/albums/p537/MetalWerkz/38BFA78E-EF48-44EB-AC0A-BB79A51EF0A3-3331-000003A095A52225.jpghttp://i1154.photobucket.com/albums/p537/MetalWerkz/9FA1AEBC-CA3A-4361-9D1E-E8954C947FDD-3331-000003A08E4B8911.jpghttp://i1154.photobucket.com/albums/p537/MetalWerkz/E9A77D06-C9E0-4419-BA86-1B06C534D2EF-3331-000003A07FD56780.jpg

[Rufus]

Droooool

[KingDingaLing]

Lol, not sure how it happened but somehow I was lucky enough to be at the right place at the right time to be able to help out on Jake's car. Extremely happy to be part of something like .

clean work goes a long way! :thumbup: I can definitely appreciate clean fabrication, it's apart of my success with personal builds. Even if it's something as simple as mounting something, you make it clean. I guarantee jakes car is not the last magazine car you will be apart of.

[disfunctionalEF]

clean work goes a long way! :thumbup: I can definitely appreciate clean fabrication, it's apart of my success with personal builds. Even if it's something as simple as mounting something, you make it clean. I guarantee jakes car is not the last magazine car you will be apart of.

Thanks RC that means a lot. Was glad to work with you on Teague's an Jake's cars and cant wait to help out on your girls car.:thumbup: