PDA

View Full Version : TSR Battery relocation trays

TSRaaron
06-12-2012, 09:24 PM
This kit allows you to mount your standard Honda sized battery on the outside of the framerail, just behind the bumper..... $249.95



Fits 94-01 Integra, 92-2000 Civic.
Fits on passenger's or driver's side
Works with OR without an existing traction bar!
Comes with everything needed, except a battery!
Fits a standard Honda battery, aka group 51 or 51R (or smaller)
Completely adjustable from front to back to accomodate different tire sizes and allow the best bumper fitment!
All brackets are black powdercoated and hardware is zinc plated to resist corrosion.
Billet Aluminum battery hold down kit, with TSR logo engraved.



http://i283.photobucket.com/albums/kk286/fraaron/DSC_0078Small-Copy.jpg


http://i283.photobucket.com/albums/kk286/fraaron/DSC_0088Small-Copy.jpg


http://i283.photobucket.com/albums/kk286/fraaron/DSC_0127Small-Copy.jpg


http://i283.photobucket.com/albums/kk286/fraaron/DSC_0150Small-Copy.jpg


http://i283.photobucket.com/albums/kk286/fraaron/DSC_0153Small-Copy.jpg


http://i283.photobucket.com/albums/kk286/fraaron/DSC_0140Small-Copy.jpg

http://i283.photobucket.com/albums/kk286/fraaron/DSC_0030Small.jpg



http://i283.photobucket.com/albums/kk286/fraaron/DSC_0101Small-Copy.jpg

http://i283.photobucket.com/albums/kk286/fraaron/DSC_0050Small.jpg

http://i283.photobucket.com/albums/kk286/fraaron/DSC_0013Small-Copy.jpg
KingDingaLing
06-12-2012, 09:38 PM
RCG APPROVED!!! I run one on the mugen eg9 4dr. Love it!!
EM1LIFE
06-13-2012, 12:10 AM
Would you sell jus the battery hold down kit? If so how much
TSRaaron
06-13-2012, 08:16 AM
Sorry battery hold down is not available separately.
clean4door
06-13-2012, 08:18 AM
:thumbup:
Rzarectah
06-13-2012, 08:45 AM
Damn that thing is fresh!!!
2point6
06-13-2012, 10:33 AM
Bad Ass!
locash
06-13-2012, 10:39 AM
That thing sure is pretty, and makes this job a LOT easier than it used to.. Whoever came up with the plan to make those deserves to get rich! :)
dE.fUsEd
06-13-2012, 02:58 PM
This pass spec at tracks? I doubt it.

:drive:
jdmrex1
06-13-2012, 06:49 PM
Sooo this doesn't fit 88-91 civics?
TSRaaron
06-14-2012, 09:31 AM
This pass spec at tracks? I doubt it.

:drive:

Yes it will pass tech. Since the battery is in the front of the car a sealed box isn't necessary.

Sooo this doesn't fit 88-91 civics?

Sorry it will not fit 88-91 Civics.
PENTAGRAM_OF_EVIL
06-20-2012, 10:57 PM
Oh so sexy.. may need one soon.
dE.fUsEd
06-21-2012, 05:27 PM
If they were $100 cheaper I would've bought one already. :o
The Punisher
06-21-2012, 09:58 PM
Yes it will pass tech. Since the battery is in the front of the car a sealed box isn't necessary.



Sorry it will not fit 88-91 Civics.

Have you checked with NASA AZ etc regarding of its tech legality for RR?
MADEGO
06-21-2012, 10:28 PM
Nice work Aaron, you should sell some battery tie downs seperate, I would buy one.
BlueTeg
06-25-2012, 08:23 AM
This will pass NASA hpde and race group tech. The mounting hardware is equivalent (if not better) than OEM. The rules do not prohibit relocation position of any sort. They only require the battery to remain secured in its position without moving in the event of a spin or rollover AND have a non conductive cover over the positive terminal. [NASA CCRs, section 18.8, page 78] http://www.nasaproracing.com/rules/ccr.pdf

Not applicable to this kit, but the CCRs go on to say that gel cells need to have a sealed marine type case if mounted inside the driver's compartment.
RICK's-TOWING
06-25-2012, 08:34 AM
this thing is badass! Super simple!