PDA

View Full Version : a little help

lucid
04-07-2013, 06:06 PM
mods can delete
lucid
04-07-2013, 06:20 PM
this is where i'm at with the motor bay

http://i25.photobucket.com/albums/c95/lucidvtec11/908411_10151825580979622_2032218226_n_zps5305336d. jpg
INTEGRA DC2
04-07-2013, 06:58 PM
You have the traction bar down there so why would you need more? you going to mount the radiator off the traction bar??
lucid
04-07-2013, 07:44 PM
oh I deff need something their...their is like 9 spot welds at least on each side....that tells me that support is needed



traction bar is just support for the lower control arms....I don't even think u are supposed to jack the car up from their....but you can on a stock radiator support
INTEGRA DC2
04-07-2013, 08:03 PM
do you plan on running a bumper support? I have jacked cars up on traction bars before, there is no issues. if you do want to weld something in i would just use some 1 3/4 DOM tubing. LMK if you need some. I have some extra from a roll cage.
lucid
04-07-2013, 11:51 PM
i think that would work fine.....i would just need a piece....how much?
lucid
04-15-2013, 05:55 PM
finished it!!!

mods can close this