PDA

View Full Version : external wastegate?

cavyrex
03-02-2007, 10:57 AM
how do you hook up the wastegate? there are 2 holes.. one on top and one below.. what go's to whatte?
noVtecHERE
03-02-2007, 11:28 AM
its the bottom one, it also depends os which wastegate it is...
cavyrex
03-02-2007, 01:54 PM
it has no name but were do you run the line to? vacuum?
*inFamous*
03-02-2007, 02:02 PM
Which wastgate your using may help us all help you.
cavyrex
03-02-2007, 02:57 PM
dont no all i no is that he got it from ldm sport its an external and has an adjustable spring...
Mr.Burner
03-03-2007, 01:34 AM
Like this.
nocom
03-05-2007, 09:24 PM
You can test it first by pumping pressure into it - that way you can be sure which connection to use.

... or you can also watch out for the cut-off as you're driving, just be sure you're not overboosting!
advert
03-06-2007, 12:11 PM
does it look like this

http://images.andale.com/f2/126/115/23719743/1155176016144_38mm_wastgate_1.jpg

if so it goes on the side.
ej1_ex
03-08-2007, 01:18 PM
just hook one up to the boost controller and close the other one up. I did that and I never had any problem. See if this helps.
advert
03-09-2007, 11:33 AM
just hook one up to the boost controller and close the other one up. I did that and I never had any problem. See if this helps.

close the other one up?

if you sealed the top one that wouldent help him well at all.
RICK's-TOWING
07-19-2007, 11:13 PM
wow!!!!!!!lol
Hazard_tb3
07-22-2007, 04:28 PM
dont block either!!
most likely its like this
the vac hole at the "top" is for a boost controller... if u dont have one then just leave it open
the vac hole on the "side" is to a vac line on ur TB and u NEED it there
this is my setup...
if im wrong someone feel free to correct me