PDA

View Full Version : Help : (


lunchb0xxx
03-31-2007, 10:28 AM
alright... well my civic runs pretty good for my DD and gets the job done for sure... BUT for a long time ago it would kinda putt at the tops of 3-5 gears.... didnt think much of it... but now... it does it in all gears over about 3k rpm's... my tachometer goes crazy... the car putts... and sometimes even gets some real loud detenation.... everyone in my family works on chevy's so no help there.... any advice?

tegmister
03-31-2007, 10:41 AM
distributor.. ?? take the cap off and look for copper coil that might have broken off. which usually means time for a new dizzy

lunchb0xxx
03-31-2007, 12:52 PM
alright... i mean it still runs fine unless i get on it you know? this shiz happen allot"?


its a dohc zc, dizzy for a 86-89 teg work?

tegmister
03-31-2007, 12:58 PM
i dont get your question.

lunchb0xxx
03-31-2007, 01:00 PM
it turns over fine, and drives but it does that put put shit when the rpm's get higher... that happen allot?

tegmister
03-31-2007, 01:02 PM
it shouldnt happen at all, first things i would check are the distributor, see if the coil is breaking apart, than check the spark plugs. and wires. see if oil is getting into the spark plug cylinders. than if thats all fine, than you might be throwing a code.. , but its hard to say over the internet.

lunchb0xxx
03-31-2007, 01:39 PM
my ses light is good, the ecu light isnt blinking, i just changed the gaskets to the spark plugs, no oil there.... it sounds allot like just a ton of misfiring....

lunchb0xxx
03-31-2007, 06:42 PM
where do i look on the dizzy? there's no coil?

90civicdx
04-01-2007, 01:18 AM
u have to take off the cap to look its kinda looks like a copper spring coming from the base

lunchb0xxx
04-01-2007, 11:20 AM
i swear im fucking stupid.... theres no coil on my dizz....

lsvtec123
08-25-2009, 07:44 PM
distributor

singlecam_eg
08-25-2009, 07:47 PM
Happened to me...got a new dizzy and no longer have the problem