subframe reinforce when using 23mm itr sway

[DC2lsvtec]

do i need to use some sort of subframe reinforcment when using the 23mm itr front/rear sway on my 01 dc2, is it optional will i really need it? let me know thanks, Greg

[Neebs]

Its optional, but I would recommend it because the frame could get torn. If it was me I definately get it.

[BlueTeg]

do i need to use some sort of subframe reinforcment when using the 23mm itr front/rear sway on my 01 dc2, is it optional will i really need it? let me know thanks, Greg

usdm and jdm itr front swaybar is 24mm

usdm rear swaybar is 22mm
jdm rear swaybar is 23mm
^ you need subframe reinforcement for both of these. Something as simple as the BSQ kit will be fine ($20 shippped, can't beat that).

[DC2lsvtec]

thanks good lookin out fellas

[dantana]

depending on your spring rates you might need a stronger sub reinforce kit.

[DC2lsvtec]

so the bsq is good enough or not?

[thaiphob]

ive been running th BSQ kit for two years now. no problems at all

[dantana]

so the bsq is good enough or not?


i said "depending on your spring rates"

so what are they!?!?!?
tires too>?
dan

[tincam84]

ive been running th BSQ kit for two years now. no problems at all

x2

but im running the puny 22