speedomoter wont work?

[YOUNGBUCK-EK]

ok everything works on my gauges exept the speedo? wich wire hooks up to the speedo in the back of the cluster?

[90civicsi]

its a big thick black one

[F40]

It's a cable... Wiggle the end of it that goes into your tranny around, then wiggle the end that goes into your cluster around.

[elbowpunk]

a pain in the ass cable... i like to call it !! Good luck

[jgregg]

I have a cluster if you need it . I will have to look when I get home and see if its a 88-89 or a 90-91 .
I have had it for a long time it was out of a si crx but I dont remember what year .
its showing around 175,000 I think . worked great when removed from car . $40 obo

[YOUNGBUCK-EK]

ok sounds good ill try all those things. ill get back to you if i need a new cluster gregg.

[YOUNGBUCK-EK]

thanks f40 it was unplugged from the tranny. so i got a pair of gsr seats how hard is it to install them into a crx?

[F40]

thanks f40 it was unplugged from the tranny. so i got a pair of gsr seats how hard is it to install them into a crx?

Do it right and swap the rails from your old seats to the new ones...

If your CRX is an Si I don't see why you would want to swap seats though.

[YOUNGBUCK-EK]

its not it is a dx. will i need to weld the reail on?

[noVtecHERE]

Dx Ftw!

[90civicdx]

i didnt have to weld mine on you just swap the seat rails its bolting shit little modification might have to be done

[fivesfe]

i was unable to swap the rails from my dc2 gsr seats, i also tried swapping the seat pan, still didnt work. i ended up just using the dc2 rails, 3 of the bolts line up wit a lil persuasion, the 4th you will need a drill or something to widin the hole

[JDM BOII]

make sure the cable is in your trans all the way and into you speedo... could be a bad speed sensor or the cable might be bad