dc dash---eg hatchback

[babyrex22]

i just got a DC2 complete dash and gauge cluster
now i need some one who has experience doin
shit like this to come help or give me some directions bout the wiring
and shit into a eg

all help would be appreciated
help me ppplllllleeeeaaaazzzzz!!!!!!!

[DJ NeX]

PM Akibahn. He's done it before.

[babyrex22]

called him up and got no answer
anybody else wanna help

[babyrex22]

bump

[babyrex22]

this is all i can find on honda tech or watever its called


Using the GSR harness (which I have done), it's very simple to get your dash 100% working.

You can use the GREEN and BLUE plug, which plug right into the Civic fuse box plugs.

HOWEVER

The grey plug has additional pinouts on the Integra dash harness and cannot be used. Just retain the Civic grey plug and match the pinouts.

I am currently making a JPEG diagram for this -- will be up soon.

ONE THING, your turn signals will not work.

Why?

This is why:

The power wire going to the Integra hazard switch is the Yel/Blk wire, where-as the Civic hazard switch is the YEL wire.

Just simply take the Yel/Blk wire from the Integra harness (which is an unused wire from the grey plug), and splice that into the Yel wire on the GREEN plug (the middle pinout YEL wire.

[azcrx]

Check this. Lots of pics. and details.

http://www.honda-tech.com/zerothread?id=1211255

[babyrex22]

yea it was pretty good

[projectaccord]

haha lucky (akibahn) went through hell with his, but it looks sick as hell man. good luck

[babyrex22]

thanx

[92egb20]

Its pretty easy. When i did it, i used all the heater box and blower motor from the teg!!! It all worked great for me...

[tons123az]

im lookin for eg power doors.............can u get them ......let me kno 602 423 5890