PDA

View Full Version : need tips and advice for my swap


JDM2Heavy
04-29-2007, 11:06 PM
im swapping out my dual point 1.5 motor out of my crx and puttin my 99 ex d16y8 into the crx..

need tips and advice if it would fit my 1.5 tranny or not

if the mounts fits

etc. thanks

YewllowDA
04-29-2007, 11:40 PM
it would fit the tranny.
get the obd1 EX or SI harness......
same mounts, axles should fit
the PS brackets might needed to be swapped when keeping it...

egcrk90
04-30-2007, 09:25 AM
yea ive done it just swap passengers side braket and your intake mani and sensors also if using cable trans swap clutch and flyweel to the motor your using

2poor2tune
04-30-2007, 11:34 AM
yup. all this and a dpfi to mpfi swap. you will need to do some wiring and decide if you want to keep it obd-0 or go the good way and get obd-1

JDM2Heavy
04-30-2007, 01:52 PM
will my hydro clutch fit in?

onefst91hatch
04-30-2007, 10:26 PM
will my hydro clutch fit in?

yes

onefst91hatch
04-30-2007, 10:27 PM
the PS brackets might needed to be swapped when keeping it...

Crx's dont have PS

JDM2Heavy
05-03-2007, 09:49 AM
if i find a obd1 ex harness will it straight plug and play??

or

can would it be possible if i can use my obd2 harness and keep it simple??