PDA

View Full Version : obd1 cabin harness.

Colten79
05-16-2007, 08:50 PM
I like turtles
2poor2tune
05-16-2007, 09:40 PM
if you have the complete harness. yes it will work great. but thinkabout the cluster. you will either need to rewire it for the original or swap the new one it. climate controll probly wont line up. ahh lots of tail light rewiring. maybe fuel pump wiring. lots of crap that makes it rediculus. but it you just wnt the car to run like a drag car then just ground it in the right spots and go.
onefst91hatch
05-17-2007, 12:11 AM
i have seen a complete 95 teg harness in a 88 hatch. from headlights to tail lights it was all 95 teg. it was sweet. teg dash, teg power windows. everything. it can be done but its gonna take some time and patience!!
Colten79
05-17-2007, 09:45 AM
I like turtles
2poor2tune
05-17-2007, 12:08 PM
well look at it this way. most of the clips change. thats about it. all you would need to do is rewire your old clips onto the new 95 harness and then plug it is again. not to hard if you think about it but it would be way harder then buying a obd 0-1 jumper harness
onefst91hatch
05-17-2007, 05:17 PM
well look at it this way. most of the clips change. thats about it. all you would need to do is rewire your old clips onto the new 95 harness and then plug it is again. not to hard if you think about it but it would be way harder then buying a obd 0-1 jumper harness

very true!
Colten79
05-17-2007, 11:12 PM
i like turtles
onefst91hatch
05-17-2007, 11:20 PM
heres a pick of one http://www.azht.net/forum/showthread.php?t=27962