PDA

View Full Version : Crx Motor Mounts For B18

REDREX
05-21-2007, 11:10 AM
Does Anyone Know Who Sells Motor Mounts For B18 Swap Into Crx Other Than Hasport
2poor2tune
05-21-2007, 11:39 AM
any b series into ef mounts will work. go on ebay and you will find them for 100 bucks.
hyperguyy99
05-21-2007, 11:55 AM
i have a set of hasports for a 88-91 civic.i will sell you them for 250 never used hit me up at hyper1991civic@aol.com
hyperguyy99
05-21-2007, 11:56 AM
i have a set of hasport mounts for a 88-91 civic i will let them go for 250.00 email me back if your interested my email adress is hyperguyy99@yahoo.com my name is Doug
2poor2tune
05-21-2007, 10:13 PM
i have a set of hasport mounts for a 88-91 civic i will let them go for 250.00 email me back if your interested my email adress is hyperguyy99@yahoo.com my name is Doug


good deal
onefst91hatch
05-22-2007, 05:15 AM
i have some hasports as well. $225 picked up, 250 delivered
onesikdb8
05-22-2007, 11:00 AM
I would stick with the HASport mounts. I've tried other companies and I did not like them.
Type - O
05-22-2007, 02:31 PM
what about getting Si-R mounts from honda? do you think they sell them here?
2poor2tune
05-22-2007, 10:48 PM
what about getting Si-R mounts from honda? do you think they sell them here?

dont work. they had a different rear crossmember in japan and it just wont work. what i was told by a very knowledgable shop.
Type - O
05-23-2007, 12:04 AM
dang, there goes my cheap way out lol
onefst91hatch
05-23-2007, 05:18 PM
dont work. they had a different rear crossmember in japan and it just wont work. what i was told by a very knowledgable shop.

yes they will. i have the JDM crossmember sitting in my shop right now. i have used the SiR mounts before!
2poor2tune
05-24-2007, 12:23 AM
not what i was told. did you use the sir crossmember on the car you used the mounts in. i dont hink they work with the stock crossmember. but i can the this working now that i think of it. just use the 2 side mounts(sir) and then use your stock rear mount adn just move it over to the other holes for the b series swap. done it before.
onefst91hatch
05-24-2007, 01:01 AM
not what i was told. did you use the sir crossmember on the car you used the mounts in. i dont hink they work with the stock crossmember. but i can the this working now that i think of it. just use the 2 side mounts(sir) and then use your stock rear mount adn just move it over to the other holes for the b series swap. done it before.

no i couldnt use the SiR crossmember as it is for RHD rack and pinion. but the mount holes are in the same plcae. and it owuld be beter to use a stock DA rear mount than the civic as you will use three holes instead of one!