side marker instal help.

[Bodykit]

picked up some jdm side markers from tsp and either need something to show me how to do it with the correct jdm placement or someone to do it if u know how and price if applies lol thx.

[*inFamous*]

pretty easy, templates are on Honda Tech, use a drill to make the initial hole once u've marked out the marker, then use a dremel to cut the whole accordingly.

http://www.jdmuniverse.com/forums/showthread.php?t=38931

[Bodykit]

pretty easy, templates are on Honda Tech, use a drill to make the initial hole once u've marked out the marker, then use a dremel to cut the whole accordingly.
ok now I just gotta find a dremel lol thx yo

[*inFamous*]

np mang gl/ check the thread i linked to

[Honduhluv]

HOme depot man for like $60 bucks thats where I bought mine.

[Bodykit]

HOme depot man for like $60 bucks thats where I bought mine.
did u instal urs?

[*inFamous*]

installation is pie man, just use that template. just cut the holes small, and slowly make them larger as you test fit them.

be sure to use a LEVEL when marking ur lines!

[Bodykit]

installation is pie man, just use that template. just cut the holes small, and slowly make them larger as you test fit them.

be sure to use a LEVEL when marking ur lines!

lol maybe easy for u mr.jdm I always mess the easy stuff up that's why I'm iffy to do it myself lol

[*inFamous*]

lol maybe easy for u mr.jdm I always mess the easy stuff up that's why I'm iffy to do it myself lol

saw u today on elliot, was behind ya, didn't ya see meh!!!

[Honduhluv]

did u instal urs?

Yes!! I eye balled it from jdmdc2 car and did it myself. Your welcome to barrow my dremel if ya want.

Just give me a holler 480-246-6471 kenny

[Bodykit]

saw u today on elliot, was behind ya, didn't ya see meh!!!
haha I think I did! I was heading east right? on my way to my chicks house from work.

[AZ93Civic]

lol maybe easy for u mr.jdm I always mess the easy stuff up that's why I'm iffy to do it myself lol

i got to do mine too, so if u want help i will help

[Bodykit]

i got to do mine too, so if u want help i will help
u know how and have u done it before?

[dr@ke]

it's not that hard trust me!!!!!!!!!!!!goodluck and don't be scared!!!!!!!

[Tweeder]

only thing you really need to watch for is not to make the holes to big. the wiring is cake

[DJ Soysauce]

Easy! but make sure you start off small then go big, cause there is no turning back.

[myegnme]

shit is cake. i was a little worried cause i dont got a backup set of fenders to go back on.. and i just took my dremil and started cuttin away...but it goes right above the fender side molding..about 3" above. I forget the exact length but i guesstimated and it looks like i changed the front end. look on hondatech. (its easy)

[AZ93Civic]

u know how and have u done it before?

na but its not that difficult to do

[Honduhluv]

Its easy using a dremel cutting disc just cut top.bottom sides and use a grinder to shape it and smooth out the edges.

first get a green masking tape its works great well good luck on it brandon.