Clutch master cylinder problem?

[LatinDC2]

My clutch was just replaced, now the pedal is kinda having trouble going back up, when i change gear like the pedal stay low, i have to push the pedal up with my foot, u guys think is my master cylinder?

[ayoitsmeceez]

bleed it...make sure u have enough fluid too

[bmxican]

bleed it...make sure u have enough fluid too

seems like you have to bleed it, like he said.

[LatinDC2]

can anyone explain to me how can i bleed it?

[Agent Smith]

it's just like bleeding the brakes except there is only one bleed valve & be careful because the mc has a SMALL reservoir.

[LatinDC2]

it's just like bleeding the brakes except there is only one bleed valve & be careful because the mc has a SMALL reservoir.

Wheres that nipple....:tits: by the tranny???

[bmxican]

The nipple is on your slave cylinder. make sure you have plenty of fluid before you start. You need another person to help you aswell. You pump the clutch muliple times, then you open the nipple a little. Repeat process till you get no more air/perfect clutch cushion.

[LatinDC2]

The nipple is on your slave cylinder. make sure you have plenty of fluid before you start. You need another person to help you aswell. You pump the clutch muliple times, then you open the nipple a little. Repeat process till you get no more air/perfect clutch cushion.

http://www.team-integra.net/images/BAEC1978-D3A7-4405-AB2D-2761DC15A96D/articles/maintenance/clutchf/clutchf1.jpg
That one right??

[bmxican]

yup!!!!!! thats the slave right there!

[LatinDC2]

yup!!!!!! thats the slave right there!

Orale Gracias!!:blunt:

[Agent Smith]

another thing you should check is under the dash by your petals, make sure there is NO fuild dripping or there at all leaking, even just a bit & you likely need the mc replaced...

[LatinDC2]

another thing you should check is under the dash by your petals, make sure there is NO fuild dripping or there at all leaking, even just a bit & you likely need the mc replaced...

There is leaking....

[Agent Smith]

replace the clutch mc if that is the one leaking (check the brake mc while your at it & determine which one is leaking...) :) check out team-integra.net they have some articles on replacing it if I recall...

[bmxican]

if it is your MC is the integra and EG interchangable?? IF so I got a brand new Omni power one that I would be willing to part with!!! Soo much better than oem too!

[azsol]

if it is your MC is the integra and EG interchangable?? IF so I got a brand new Omni power one that I would be willing to part with!!! Soo much better than oem too!

x2

[Phillie]

Alittle OT but will a 99 civic MC work on an EG?

[bmxican]

Alittle OT but will a 99 civic MC work on an EG?



going by the omni site/graph and how they sell it. I've came to think they are not interchange-able.

http://www.omnipowerusa.com/product.asp?P_ID=132