PDA

View Full Version : What other turbo can i use

b20forlife
06-09-2007, 07:45 PM
ok i have a full race manifol that is flanged for a t25. i was wondering what other turbo can i use or how much boost will my t25 hold up to
onefst91hatch
06-11-2007, 05:33 AM
GT28RS. thats the turbo i would use. dual BB so really fast spool and can push i believe around 12-13 and still be efficient. have seen those turbos produce some very good numbers!!
noVtecHERE
06-11-2007, 03:02 PM
^^^ same here, i wonder what their max actual efficiency range is someone got a compressor map?
RHDDonnieee
06-11-2007, 03:09 PM
i had a t 28 .. lol ... um get a bigger turbo
b20forlife
06-11-2007, 10:04 PM
yeah i seen a t28 that said effecient up to 460 hp on full race's page
boostedrex
06-12-2007, 09:51 PM
damn left my computer on
b20forlife
06-13-2007, 08:13 PM
u r over 600 hp on a t25???

i dont get what your saying. i have a t25 on my sohc vtec coup that made 220 whp on 11 psi but i want to turn up the boost on this car
almazan85
06-14-2007, 12:23 AM
i dont get what your saying. i have a t25 on my sohc vtec coup that made 220 whp on 11 psi but i want to turn up the boost on this car

220whp??? what setup do you have as far as internals and FM? I am just building up my 95 civic cp single cam, stock internals, 310cc injectors, fuel pump, regulator, and a greddy turbo kit (18g). what you guys think my numbers will be?? DD with ac and ps.
Full-Race Henry
06-14-2007, 05:54 PM
you will be able to run almost any other turbo that is t2 flanged. if you need one, let me know and i will try to find you one
b20forlife
06-14-2007, 06:45 PM
i have a full race turbo kit and i am tuned on 11 pounds. i made 220 whp and a little over 200 wheel torque. i think preety good numbers for a jdm d15. stock internals tuned on neptune
Type - O
06-14-2007, 07:23 PM
d15? stock internals? thats nuts
b20forlife
06-14-2007, 11:01 PM
d15? stock internals? thats nuts

yeah stock internals. fast for a single cam but i want like 400 out of it when i am done building it
GNU
07-19-2007, 07:03 PM
yeah if you want to stick with the t25 flange, get a gt28rs .63 or .83 depending on how much power you want to make.
kawgomoo
10-27-2007, 11:14 PM
is t25 the dsm flange? then you could get the fp3065 ;)

you can always cut the flange off and have a different one welded on.
2.3Tnut
11-05-2007, 03:54 PM
I would go gt2871r