View Full Version : vtec sohc head q's
90civicsi
06-15-2007, 02:15 PM
could i just drop a vtec head on ecu, wiring, and how would i wire up the vtec cylinder and is it worth all the work?
thxxx guys
:crazy::crazy::crazy::crazy::crazy:
onefst91hatch
06-15-2007, 02:18 PM
i would say its worth it. but only if you come up on a head cheap. cuz sohc vtec long blocks sell on here for 400-700 all day!
cbaracing
06-15-2007, 02:25 PM
could i just drop a vtec head on
is it worth all the work?
yes
no
90civicsi
06-15-2007, 02:35 PM
what would be a good head? one off a d16z6?
cbaracing
06-15-2007, 02:53 PM
what would be a good head? one off a d16z6?
a d16z6 is a sohc vtec.
why do you want to swap heads?
what model civic do you have?
sn_halo
06-15-2007, 02:54 PM
ya get a z6, make sure u take out the oil jet if u have one. get some arp studs,new timing belt. then get a obd1 ecu, and wiring harness, then switch do dpfi if u havent already. good luck let me kno if u need any more help.
90civicsi
06-15-2007, 03:14 PM
a d16z6 is a sohc vtec.
why do you want to swap heads?
what model civic do you have?
read the screen name 90civicsi
a little more power
90civicsi
06-15-2007, 03:16 PM
ya get a z6, make sure u take out the oil jet if u have one. get some arp studs,new timing belt. then get a obd1 ecu, and wiring harness, then switch do dpfi if u havent already. good luck let me kno if u need any more help.
so i should run dpfi not mpfi?
could i just pull the ecu from a sol? or is that obd2?
comptonasskerry
06-15-2007, 04:42 PM
so i should run dpfi not mpfi?
could i just pull the ecu from a sol? or is that obd2?
i think he ment that if u r dpfi to switch to mpfi. u have to to run that head. but if ur name is right then all u would have to do is wire vtec and a couple other wires for that and call it a day. pm ILIKETODRIVE
he is the sohc GOD.
hope that helps
90civicsi
06-15-2007, 11:03 PM
thx
sn_halo
06-15-2007, 11:27 PM
sorry i meant mpfi.
ILIKETODRIVE
06-16-2007, 12:48 AM
It's not worth it unless you can find a COMPLETE Z6 head for around $100 AND if you convert to OBD-1 and run a P28 ECU.
You're compression would be about 10:1 so a stock P28 ECU would be fine.
90civicsi
06-17-2007, 09:21 PM
It's not worth it unless you can find a COMPLETE Z6 head for around $100 AND if you convert to OBD-1 and run a P28 ECU.
You're compression would be about 10:1 so a stock P28 ECU would be fine.
vary help full!!!!!!!!!!!!:clap::clap:
vBulletin® v3.8.0, Copyright ©2000-2024, Jelsoft Enterprises Ltd.