best intake?

[Grease Monkey]

ok just wondering what u guys think is the best intake for your money. thinking about getting 1, just dont really know which 2 get. post up what u guys got. any input is appreciated.

thanx in advance

[Type - O]

what motor

[Type - O]

what motor

[Grease Monkey]

b20 vtec. its gsr head

[cashflow]

get the whale penis:blunt:

[Grease Monkey]

get the whale penis:blunt:

CARBON FIBER!!

[projectaccord]

whale penis FTW!!haha

[ayoitsmeceez]

i have a whale penis lol....works good i guess.....hard to tell...any kind of difference is going to be very minimal

[Grease Monkey]

yeh its only a 5-8 hp gain for almost ANY intake. so idk just keep um coming
and i'll continue to do some research

[cashflow]

u can always go aem their a good company when it comes to intakes

[Acurazor]

I'm happy with my AEM cold air. Your not gonna see any differences in intakes unless your on a dyno anyway. If you get a short ram it's gonna be a little louder than a cold air. Just a heads up.

[Grease Monkey]

u can always go aem their a good company when it comes to intakes

thanx dude

I'm happy with my AEM cold air. Your not gonna see any differences in intakes unless your on a dyno anyway. If you get a short ram it's gonna be a little louder than a cold air. Just a heads up.

yeh thanx man. the whale penis intake is FRICKIN loud. just sounds like the cars always bogging out.

http://i175.photobucket.com/albums/w151/hawaiianstupidass_2007/frontmountintake.jpg

thinking about that intake up there! what u guys think? full of it? or worth it??

[Chino213]

just be patience and someone will sell a integra type r cold air intake.. you could buy the 3 in coupler(hose) so you could connect it to your throttle body. it sounds really niceee man and good upper gains

[Grease Monkey]

just be patience and someone will sell a integra type r cold air intake.. you could buy the 3 in coupler(hose) so you could connect it to your throttle body. it sounds really niceee man and good upper gains

thanx 4 the input dide i'll keep looking around.


any1 know anything about that front mount intake?

[Type - O]

i dont like the front mount intake. looks rice just cuz it seems like a FMIC but not. my friend got a ebay CAI and didnt do too badly. he said he didnt really notice a huge difference between it and his (stolen) AEM CAI. this was on a mitsubishi eclipse BTW

[Grease Monkey]

ohh k, thanx dude. hmmm i guess its between the whales penis and the aem. i guess its up to me. but thanx again everbody for the input!

[newcuttys]

bump for whale penis! <br>
http://passwordjdm.com/images/Products/Password%20JDM%20Carbon%20Fiber%20PowerChamber%20I ntake%20(DC2%20Integra%20w%20ABS)%20Large.jpg

PRICE: $229.99
url:http://passwordjdm.com/PasswordJDM-Carbon-Fiber-PowerChamber-Intake-DC2-Integra-w-ABS-P139C5.aspx

[sn_halo]

if i were u i would just get a cheap one for $30 cuz ur gona get the same amount of hp out of an aem vrs a cheap one and u can put the other $150 toward something else. just my opinion.

[SweetNuts]

if i were u i would just get a cheap one for $30 cuz ur gona get the same amount of hp out of an aem vrs a cheap one and u can put the other $150 toward something else. just my opinion.

x2 i always had to have the name brand intakes on my other cars but i got a cheapo one this time and it feels the same as the expensive ones. i got mine for $25 and it works great.
http://i33.photobucket.com/albums/d93/dc5snrd/RAMIntake2.jpg

[newcuttys]

yeah but how long will it last? ^^^

[Nott_Sure]

+1 for whale penis or ice man

[MorningWood]

all you need is a good filter

[hawaii_DA6]

find a DC2 Stock intake. and get High flow filter.

Manufacturers spend countless hours refining, researching, and developing Factory Intake systems. The Selica content in Hondas Factory intake arms are to reduce conductive heat transfer, to both the throttle boddie, and to the air passing through it. Whenever you install an aluminum or like metal counterpart, the engine bay heat has a much easier time heat soaking the Intake arm/ and or box/ filter.

Why do you think all High end aftermarket or factory Intake Systems utilize expensive materials such as Mugen's, J's Racing, and Gruppe M's Carbon Fiber pieces. as well as the high end carbon plastic/ selica pieces.

[jdmEG-6]

i say password... had both style on my car .. the plastic wit the carbon wrapd around and now i have the dry carbon...my po is the password...or arc

[Honduhluv]

aem cold air.

[jdmEG-6]

fuck aem.. had aem cold air on my car and in do time it fuckn rubs and ends up wit a big hole carved around it.. u have ti make that whole in tha engine bay bigger.. to much bullshit...

[taggart_lumpy]

for the price try fujita

[Agent Smith]

aem!

[JDM wheel whore]

just throwin it oot there type-r intake tube and box 2.5 dia. cant go wrong wit that its cheap like 50 bucks + ship

[SiR Mikey]

OEM, Comptech, ARC, Mugen

[sn_halo]

find a DC2 Stock intake. and get High flow filter.

Manufacturers spend countless hours refining, researching, and developing Factory Intake systems. The Selica content in Hondas Factory intake arms are to reduce conductive heat transfer, to both the throttle boddie, and to the air passing through it. Whenever you install an aluminum or like metal counterpart, the engine bay heat has a much easier time heat soaking the Intake arm/ and or box/ filter.

Why do you think all High end aftermarket or factory Intake Systems utilize expensive materials such as Mugen's, J's Racing, and Gruppe M's Carbon Fiber pieces. as well as the high end carbon plastic/ selica pieces.
ya, but for that extra 1 or 2 hp and having a brand name is it really worth the extra $200 ?

[Grease Monkey]

hmm. im kinna pondering all of this. i have a ghetto ractive short ram intake. its alright. but i wouldnt mind testing different intakes but idk anybody down here that has intake that im considering. i guess on this its all hit and miss. i'll shop around and i guess what ever comes first, i'll try. if not i'll try again until im happy.

thanx guys for all the input and info.

[ChicagoMike]

ICEMAN intakes FTW!:clap:

[Agent Smith]

OEM, Comptech, ARC, Mugen
other than the oem, $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
ICEMAN intakes FTW!:clap:

had one on my accord, absolutely loved it :)

[Grease Monkey]

ok. another intake to consider. i know someone with a iceman intake. i should ask him how he likes it. thanx guys

[I Hate Import Cars]

find a DC2 Stock intake. and get High flow filter.

Manufacturers spend countless hours refining, researching, and developing Factory Intake systems. The Selica content in Hondas Factory intake arms are to reduce conductive heat transfer, to both the throttle boddie, and to the air passing through it. Whenever you install an aluminum or like metal counterpart, the engine bay heat has a much easier time heat soaking the Intake arm/ and or box/ filter.

Why do you think all High end aftermarket or factory Intake Systems utilize expensive materials such as Mugen's, J's Racing, and Gruppe M's Carbon Fiber pieces. as well as the high end carbon plastic/ selica pieces.

x2. I have an aluminum no name intake ont my car right now, and on the dyno it heat soaked so bad you couldn't even touch the manifold! Joe (LOCASH) said he's never seen one heat soak that bad. That's the only thing NOT stock in the intake system. I'd love to put a stock or another composite type intake on mine, but cannot justify that kind of money on that. Speaking of which, and not to be a thread theif, but I have an EG with a B16. Right now I have the stock EG intake box and filter and all, but some crap ass aluminum tube to connect it to the throttle body since they're different diameters from either the stock 95 DX OR the stock 99 Si one. Anyone know what will fit in there for using that stock setup?

[Grease Monkey]

nah no problem dude. thanx 4 the input tho

[Agent Smith]

x2. I have an aluminum no name intake ont my car right now, and on the dyno it heat soaked so bad you couldn't even touch the manifold! Joe (LOCASH) said he's never seen one heat soak that bad. That's the only thing NOT stock in the intake system. I'd love to put a stock or another composite type intake on mine, but cannot justify that kind of money on that. Speaking of which, and not to be a thread theif, but I have an EG with a B16. Right now I have the stock EG intake box and filter and all, but some crap ass aluminum tube to connect it to the throttle body since they're different diameters from either the stock 95 DX OR the stock 99 Si one. Anyone know what will fit in there for using that stock setup?
I'd imagine one from an integra would fit...

[Chino213]

i say comptech icebox or the aem cold air intake.
go wit comptech if you have the money.

[I Hate Import Cars]

I'd imagine one from an integra would fit...

ANYONE GOT AN INTAKE TUBE FROM A STOCK DC2 THEY WANNA GET RID OF?

[hawaii_DA6]

ya, but for that extra 1 or 2 hp and having a brand name is it really worth the extra $200 ?

Are talking about the high end ones I mentioned? if so, then try $300 - $1000 instead of $200.

and the gains are a little higher than 1-2 horse.

[sn_halo]

Are talking about the high end ones I mentioned? if so, then try $300 - $1000 instead of $200.

and the gains are a little higher than 1-2 horse.ok well my point is an aem is wat like $250? and an ebay one is around $30. im sure on a stock b16 making 160hp with a ebay intake it will make about 163hp. then with an aem i doubt more then 170hp. just my opinion and dam 300-1000 for an intake is ridicoulis i can piece together a whole turbo kit for that much and make 10x the power.

[Agent Smith]

ok well my point is an aem is wat like $250? and an ebay one is around $30. im sure on a stock b16 making 160hp with a ebay intake it will make about 163hp. then with an aem i doubt more then 170hp. just my opinion and dam 300-1000 for an intake is ridicoulis i can piece together a whole turbo kit for that much and make 10x the power.
um... turbo=engine wear far greater than a stock na car... some people like things to LAST... and you can find used aem's for about the cost of an ebay one 50-60bux...

[goose6453]

thanx dude



yeh thanx man. the whale penis intake is FRICKIN loud. just sounds like the cars always bogging out.

http://i175.photobucket.com/albums/w151/hawaiianstupidass_2007/frontmountintake.jpg

thinking about that intake up there! what u guys think? full of it? or worth it??



where do you buy these that looks nice:tongue:

[Grease Monkey]

where do you buy these that looks nice:tongue:

i found that on eBay. just search for frount mount intake and that should pop up

[sn_halo]

um... turbo=engine wear far greater than a stock na car... some people like things to LAST... and you can find used aem's for about the cost of an ebay one 50-60bux...on a good tune with low boost its not going to hurt ur motor that much. now were comparing oranges to rotten ones.

[Agent Smith]

on a good tune with low boost its not going to hurt ur motor that much. now were comparing oranges to rotten ones.
you are correct it won't hurt it "that much" however it will cause more wear & will wear down an engine at a much higher rate, plain & simple. :but: :offtopic2:

ps. I love boost

[newcuttys]

i still say bump for the whale p3n1s !

[StateOfMind]

If your looking at aem go get a cheapo ebay one then buy the aem filter. An aluminum tube is a aluminum tube no matter who stamps their name on it the filter is where it matters!

[ayoitsmeceez]

thanx dude



yeh thanx man. the whale penis intake is FRICKIN loud. just sounds like the cars always bogging out.

http://i175.photobucket.com/albums/w151/hawaiianstupidass_2007/frontmountintake.jpg

thinking about that intake up there! what u guys think? full of it? or worth it??

GAY

[alucard]

i have to admit the front mount intake looks pretty gay, rice, or whatever the hell the term is for it..
yet, a buddy sold me one for my wife's 00Si (25$ had to take it!), it works better than her AEM, WHEN your on the freeway, doing over 80mph... From what I can tell if your doing 80+ it seems to have some ram air effect. but only 80+.

would i pay a 100$ for one, hell no.. but if you can find one cheap, they are not too bad, if you can get over everyone asking "Is that turbo'd???"..

Now in my Integra with the JDM Type R motor, i'm using your 30$ ebay CAI special.. and I was thinking about wrapping it to reduce heat... Anyone tired this? suggestions? comments? buler? buler? buler?

`c

[Agent Smith]

i have to admit the front mount intake looks pretty gay, rice, or whatever the hell the term is for it..
yet, a buddy sold me one for my wife's 00Si (25$ had to take it!), it works better than her AEM, WHEN your on the freeway, doing over 80mph... From what I can tell if your doing 80+ it seems to have some ram air effect. but only 80+.

would i pay a 100$ for one, hell no.. but if you can find one cheap, they are not too bad, if you can get over everyone asking "Is that turbo'd???"..

Now in my Integra with the JDM Type R motor, i'm using your 30$ ebay CAI special.. and I was thinking about wrapping it to reduce heat... Anyone tired this? suggestions? comments? buler? buler? buler?

`c

go buy an aem 3" itr cai & enjoy money well spent....

when will people learn?

[hawaii_DA6]

This thread needs to be locked.

[Difussion3]

I say Comptech Icebox, I have it and love it...