block sleeving

[B20c5]

does anyone know of a machine shop that can sleeve my itr block?

[Mr.Burner]

In town, basko does it, but dont trust them. Also in town, frontier, but i dont know about them.....

I had mine done at RS in cali 1-562-926-0283

or Jim Justice @ JusticeRacingEngines.

[I Hate Import Cars]

check with Todd at S&S. I'm not sure if he does or not, but they're really good for any machining I've had done there.

[MR. Frank]

1320-Racing Sends out theirs blocks to Advance Racing Dealing with Darton Mid Sleeves......If you need a quote Call 1320-Racing At 480-966-3601:clap:

[Mr.Burner]

S&S doesn't do block sleeving....
Your best bet is RS.. you can get an open deck for under a G. and i've seen them hold up 35psi+

[18c]

yah S&S doesnt do sleeving, i swear though someone in arizona was doing Darton Mid's for like 1000 with hone i think not too long ago which is amazing and pissed me off. I personally wouldnt send it to a machine shop who doesnt specialize in sleeving. I had mine done by Golden Eagle through Camp1320 in California.

[GNU]

S&S doesn't do block sleeving....
Your best bet is RS.. you can get an open deck for under a G. and i've seen them hold up 35psi+

since when does psi mean anything?
35psi on a t3? or 35psi on a t4 t76?

[redwidow]

I personally wouldnt send it to a machine shop who doesnt specialize in sleeving. I had mine done by Golden Eagle through Camp1320 in California.



Ding ding ding!:clap: Call Tom 818-335-5316..got mine done tthru him by GE MFG they warranty and also pressure test up to 60 psi I got the HD sleeves on my LS 84mm bore with Oring $850 but you have to pay shipping I can't recall the cost on that maybe $50. Tom is a stand up guy. Can get you parts here fastert than most shops that are local.

[I Hate Import Cars]

S&S doesn't do block sleeving....
Your best bet is RS.. you can get an open deck for under a G. and i've seen them hold up 35psi+

hhhhmmmm....correct me if I'm wrong, but doesn't that say "ALL MOTOR" at the top?

[Mr.Burner]

sure does.......

Frontier does the M.I.D's and there in town......dont know any background.