need help wiring vtec!!!!

[FourDoorSi]

hey guys well im putting a d16y8 into my 99 dx civic hatch......now i know i need to the vtec ecu and i know i gotta run vtec wires to the ecu for the vtec solenoid and pressure swtich but does anyone have a DIY??? anyone have a pin out of where the wires that i need to run go?? if anyone can give me a step by step id appreciate it....thanks guys

[FourDoorSi]

ttt

[Mr.Burner]

jeessus, you need to get a p28 ecu and jumper harness........
first: run two wires together in wire loom, one from the sol and the other from the blue wire off the psi switch through the pass side fire wall.
second: one of the two wires you just ran goes to A4 vtec solenoid valve. (bottom row second one over) the rows read up down...
third: take the other wire you ran through the fire wall and it goes to pin D6 for the pressure switch....
finally the other wire off the pressure switch is just body ground......

mmmmmmmmBAAAAHHHHHHHHH you have vtec.....

link: http://www.plxdevices.com/ECUDatabase/Honda_Acura/HON_CIV_SOL_INT_92_95.pdf

[onesikdb8]

http://i166.photobucket.com/albums/u98/onesikdb8/all%20data/11d1100714249-obd2a.jpg
http://i166.photobucket.com/albums/u98/onesikdb8/all%20data/12d1100714270-obd2b.jpg

[Mr.Burner]

we've established that^^^^^^

[FourDoorSi]

we've established that^^^^^^
thanks burner.......hey is there anyway that i can just get a obd2 single cam vtec ecu and use that instead of having to get a p28????

[FourDoorSi]

ttt

[Mr.Burner]

ya you can......but then you run into have to hook up knock, the oil pump has to have the ckp sensor, i think thats it, oh and the emissions b.s.... but yes it would work....