help with ecu in crx

[azrex91]

well i have a pm6 on my crx with my b16 but i bought a spoon pw0 n i wanted 2 plug it in but when i did it red lines at 6800 which is da same as my pm6 i was told dat i would need 2 wire 2 more wires so i can get my pw0 2 work right so if some1 can help me out 2 wire this please help me, or let me know of a website that i can look this stuff at thanx

[Mr.Burner]

1 - Add wire from 2nd O2 sensor (Green Plug) to ECU Pin # C8.
2 - Add wire from Knock Sensor ( Located next to the engine Oil Pressure sensor) to ECU Pin # B19
3 - Add wire from VTEC Oil pressure switch to ECU Pin # B5.
4 - Need to get a HF or 88/91 Civic/CRX VSS. And Connect one wire from the VSS to ECU Pin # B16 ant the other to ground.

Took 2 seconds on google Braw!

[FourDoorSi]

1 - Add wire from 2nd O2 sensor (Green Plug) to ECU Pin # C8.
2 - Add wire from Knock Sensor ( Located next to the engine Oil Pressure sensor) to ECU Pin # B19
3 - Add wire from VTEC Oil pressure switch to ECU Pin # B5.
4 - Need to get a HF or 88/91 Civic/CRX VSS. And Connect one wire from the VSS to ECU Pin # B16 ant the other to ground.

Took 2 seconds on google Braw!

listen to mr. burner...he knows his stuff....good lookin out bro