need help, gsr swap into ek hatch

[2000ek]

when I finished the swap I tried starting the car but no power is being sent to the fuel pump. The swap came with a chipped obd1 ecu and the stock p72. Is there something else I need for the swap or does is sound like a wiring problem. Thanks

[nuocmam]

do you have a jumper harness?

[2000ek]

I just have the original wiring harness that came on the motor. The motor just came out of an ek coupe that I was driving. I need an extra harness to do the swap?

[Mr.Burner]

check the fuel pump fuse and relay....and make sure the driver side harness is plugged in.
and if you dont have the ground on the harness to water outlet, it might not run...

[2000ek]

I checked the fuses and harness, but i need to make sure all my grounds are good tomarrow. thanks guys

[boostedrex]

ya bet its just a ground or unpluged plug,

[2poor2tune]

thermostat ground maybe? got me for a while.

[cLeAn_Ek9]

check the fuel pump fuse and relay....and make sure the driver side harness is plugged in.
and if you dont have the ground on the harness to water outlet, it might not run...

x2

[egcrk90]

same hear