Droppin a LS into my 98 civic hatch....HELP!!

[FourDoorSi]

ok guys so i have a 98 civic dx hatch and i got a ls motor for it...now what else do i need in order to make the drop work...i have the engine..trans..ecu...engine harness....the motor came off a 00 so its obd2b....any help will be appreciated..thanks....

wat mounts??
wat axles?
wat ecu?
wat wiring?
wat linkage??

[FourDoorSi]

ttt

[Type - O]

you will need B series mounts, maybe some B series *not sure on axels*, probably want an OBD1 ecu since they are easier to come by, OBD2-OBD1 wiring harness,

[tokyospeedpros]

94-01 integra axles and intermediate shaft obviously manual

[FourDoorSi]

ttt thanks for the help guys!!

[kawgomoo]

you can use the obd2 ls ecu no probs. then itll stay emission compliant if you care about t hat. you need the integra rear bracket, teg tranny side mount, you have to use a 00 si driver side engine bracket i believe.. since its that weird pedestal mount on that side.

wiring is pretty easy, just take th civic harness. cut the integ harness where it branches off to the injectors and splice it to the civic harness, rewire for the distrib changes. solder dont use crimp connectors :)