PDA

View Full Version : JDM Swamp


ghost9000
10-23-2007, 07:54 PM
Iam Planning to do an B16a sir2 jdm engine swap in to a 96-98 ek. It's goinig to be my first engine swap one thing I'am not sure of is will it pass emissions or what I'am goinig to need besides motors mounts ,shift linkage and axels to make this work any advice will help thanks.

Mafioso
10-23-2007, 08:12 PM
Swamps can go into cars? I thought swamps were more for land that is under sea level..

http://www.lsu.edu/icc/pictures/alligator/Swamp1.jpg

ghost9000
10-23-2007, 08:25 PM
Swamps can go into cars? I thought swamps were more for land that is under sea level..

http://www.lsu.edu/icc/pictures/alligator/Swamp1.jpg

smart ass.. my bad on the spelling

95CIVICex
10-23-2007, 09:22 PM
LoL

EG2QWIK
12-19-2007, 01:09 PM
you will need a new ECU and since your obd2 you might want to get a jumper harness. You can either change your harness to like an 00 Si harness or wire the vtec/pressure/knock/crank sensors from the ecu. Depends on what obd and ECU you run depends on what sensors you will have to wire. Other than that piece of cake!

mooshin
12-19-2007, 06:23 PM
Swamp? Sounds backwoods.

Weeman
12-20-2007, 06:02 PM
you will also need a harness done. pm me if you need help with it