PDA

View Full Version : help me out on this


skunk2h22lude
11-20-2007, 03:39 PM
ok so i was driving my ride and all the sudden it started smoking alot of white smoke, so i checked the spark plugs they were burned put new one's in & i drove it down the street it runs fine but alot of white smoke is coming out i think its my valve seals, but idk, i don't think its my head gasket cause im not leaking any oil, let me know what u think please

DJ Hookid
11-20-2007, 05:38 PM
Check your oil for bublbes. If there is any, then you blew the head gasket.

white smoke= blown headgasket

skunk2h22lude
11-20-2007, 05:52 PM
i check the oil and there is no bubbles

IntegraDA
11-20-2007, 06:33 PM
a head gasket can blow two ways. you can have coolant in your oil (most common) or you can have oil in your coolant. look at your coolant and see if it is discolored (rusty looking). do a compression test and a leak down test. that will tell you for sure.

jcvietboi
11-20-2007, 08:35 PM
there are serveral way of this problem...but as the above member said...oil in coolant or coolant in oil...i used to have oil in coolant but mine is not a head gasket i got a crack block ..so yea..but in ur occasion.i think is the head gasket....best bet...there no way that suddenly white smoke coming out when it driving time...just my .02 but hey ...hope u find out what happen

skunk2h22lude
11-21-2007, 03:53 PM
i appreciate the opinions guys

RHDDonnieee
11-21-2007, 04:10 PM
what kinda muffler you running bra?

it sounds like your mufler bearings are shot !

skunk2h22lude
11-24-2007, 07:56 AM
its just a cheap obx muffler with oem piping

wrichards2k6
11-24-2007, 11:30 PM
its just a cheap obx muffler with oem piping

He's being a douche, he's not serious.

Head gasket, pretty sure. Even if there is no oil in coolant or vice versa.

g-rex
11-25-2007, 02:43 AM
please update on the problem when u figure it out cuz the same thing happened to me only i just put a new head gasket in.

skunk2h22lude
11-25-2007, 11:15 AM
ok guys i did a leak down test & i need new valve seals! thanks 2 all of u for helping me out on this i appreciate it