Busted Bumper Clip HELP

[BBSick]

So I was backing out my girl's driveway unable to cut the wheel due to other cars being around and pretty much ripped the driver's side of the front bumper off, it's hanging and seems just to be the clip nearest to the wheel. Is there any way of fixing this or do I need a new bumper?

[Mr.HondA]

you could probably try getting some new clips and see if that works first

[bluferio]

that should be fine, unless it is ripped. then use a 10mm nut and bolt.

[BBSick]

I used the bolt that was in there and a washer and nut combo, cant get new clips because its the "clip" on the bumper itself.

[nuocmam]

that should be fine, unless it is ripped. then use a 10mm nut and bolt.

x2

[Chinky]

is it the screw/bolt that is on the inner portion of the fender well by the tire? if it is then don't waste money buying a new bumper. however i do have a extra taffeta white bumper with the wholes cut out for foggies already (shameless fs plug :grin:)

if ur talking about the clip that the screw or bolt goes into just buy a new one from honda. all tho do expect to pay 3-5 bucks a clip. u need the clip that is on the fender that the bumper screws to, unless u ghettos zip tie it. a ripped tab is no big deal, just tighten the bolt down more and it's be straight or find a plastic welder, or just heat the plastic up with a lighter let the ripped portions stick together let it dry and roll.

[EMPYRE]

:thumbup: ^^

[BBSick]

Thanks bro!