Ep3 seat swap

[MrRline2010]

Only main question I have is for removing the old seats. I know there is supposed to be something with the arming system for the airbags under here? Any advice on where to start or what to do so I don't blow up the ride from the inside :D

[rushbuster70]

i think theres a plug that goes into the chair for just the seatbelts...i dont think it has to do with the airbags.

[MrRline2010]

Latin or Rufus I know you've done the swap help me out some :d

[rushbuster70]

dang dont believe me at all...i see how it is...lol im messing man...but i've read up on it because i was going to do it with rsx seats...check out honda-tech

[MrRline2010]

linkage?

[bryantiscool]

if i remember, its either 1 or 2 wires under your seat. unclip those and remove the seats. i never plugged mine back in so i just hid em under my seats but my srs light is always gonna stay on. oh well.

[MrRline2010]

yea not looking for any srs lights. I would like to keep the car without cel or anything for as long as possible.

[bryantiscool]

oh the cel isnt on. just srs. doesnt really matter though, cause mine had the side airbags on my seats. thats the only reason why the srs light is on.

[MrRline2010]

anybody have the diy link for the install? Also iv'e heard that not all the screw bolt in? Is this true?

[bryantiscool]

i remember seeing a diy somewhere. lemme see if i can find it again. on mine, only 3 of 4 bolts line up.

[_$krilla_]

i removed my old seats when i had the civic, it has 2 wires, just unplug and ur fine

[MrRline2010]

Do I have any chance of deploying anything from this? Only reason i'm asking is because someone at honda told me before that something with the arming of the airbag is under the seat.

[Rufus]

You gotta PM me on this stuff. You can unplug and replug the new ones but whatever you do, DO NOT turn the ignition on when they are unplugged. That will cause the SRS light to come on and it has to be reset afterwards.

[bryantiscool]

You gotta PM me on this stuff. You can unplug and replug the new ones but whatever you do, DO NOT turn the ignition on when they are unplugged. That will cause the SRS light to come on and it has to be reset afterwards.

DOHH,
well i screwd up

[LatinEM1]

Here's my DIY:
http://honda-tech.com/zerothread?id=1959183

I had to swap the rails because the seats that I got had modified rails, it had EG rails. I just keep reading that its just easier to bend/drill the 4th hole that dosen't line up.
In order for you not to get a SRS light, you just have to unplug your battery for 5 mins before you unplug the SRS plug under the seat

[vtecthis]

take out the light behid ur cluster

[kawgomoo]

there is an ass sensor in the seat so it wont deploy if no one is sitting there.

you wont burst ur bags but you will get a srs light as im sure u now know.

[MrRline2010]

sweet well now I have the info just have to find a pair of seats lilrob just sold em :(