95turbohatch
02-17-2008, 03:16 PM
I cant seem to find what i am looking for in these threads..i am a new user and not to good with searchin.
Here is my issue:
I am rollin 96 teg
just put B20/vtec-b16 head
aftermarket pistons 12 to something ratio?
changed from the stock P75 ECU to the P72 vtec ECU
I Ran a hard line from Vtec solenoid to the ECU pin out/ stock harness had no Vtec ran
wired in my VAFCII controller
i am still with in my breaking the motor in period so i havent stomped on it...as far as i have noticed there in no Vtec working...no dash cluster readings..(i.e. RPM, MPH, OIL PRESS> so on.)
the motor is running ok...as far as i can tell slight idle issue nothing major though..
I am needing some help with the vtec issue and no dash reading issue.. thanks:lame:
Here is my issue:
I am rollin 96 teg
just put B20/vtec-b16 head
aftermarket pistons 12 to something ratio?
changed from the stock P75 ECU to the P72 vtec ECU
I Ran a hard line from Vtec solenoid to the ECU pin out/ stock harness had no Vtec ran
wired in my VAFCII controller
i am still with in my breaking the motor in period so i havent stomped on it...as far as i have noticed there in no Vtec working...no dash cluster readings..(i.e. RPM, MPH, OIL PRESS> so on.)
the motor is running ok...as far as i can tell slight idle issue nothing major though..
I am needing some help with the vtec issue and no dash reading issue.. thanks:lame: