paint removal

[ef-9]

need help on how to remove paint on my wheel so i could repaint it.
also I used three cans of that aircraft paint removal stuff and it still will not come off (im still on my first wheel) lol.

[Quick94Hatch]

Sandpaper and lots of time.

[2CAMSVTEC]

Sand Or Soda Blasting

[90crxsiauto]

3 dot brake fluid

[HEADSHOT]

If Aircraft Stripper Isnt Removing It Then You Probly Have Powder Coasted Rims... Get Them Sand Blasted

[civic0367]

just feather it out so that the paint is smooth with the metal but some primer on it and sand the smooth when it drys and then put ur paint on

[greeneg]

the aerosol aircraft striper doesnt work as good as the stuff you brush on

[ef-9]

kool thanks

[civic0367]

kool thanks

ya no problem. if u have any more questions just ask me I am a painter at a body shop

[werd]

WILL THE aircraft stripper remove layers of paint down to the medal??

[andyjdm]

it should

[q&s]

Some times easyoff oven cleaner will take off powder coat

[The God Damn Batman]

egg yolk

[RickM]

Im in the same boat as you. Im stripping these HX's. It took me like 5-6 Coats of stripper to take off the powdercoat. I'm trying the spray Aircraft stripper and that seems to be working pretty good.

Im still safe to primer and paint over the HX's after I take off the powder coat right?


EDIT: 2nd Coat of Stripper on the HX. I poured it on and its been sitting for a good 30-45 min. It took the powdercoat off like it was nothing.

[intel]

Im in the same boat as you. Im stripping these HX's. It took me like 5-6 Coats of stripper to take off the powdercoat. I'm trying the spray Aircraft stripper and that seems to be working pretty good.

Im still safe to primer and paint over the HX's after I take off the powder coat right?


EDIT: 2nd Coat of Stripper on the HX. I poured it on and its been sitting for a good 30-45 min. It took the powdercoat off like it was nothing.



yea it sucks in the end. it gets majority but for perfectionist youll end up having to get them blasted.

[dpd069]

Buy some aircraft stripper at a body shop supply (not the stuff at Ace) store and a cheap chip brush. Goop it on pretty thick. Cover the area you just gooped up with stripper with tin foil to hold the stripper chemical against the paint. Let it sit for about a day or so.

Before you put the stripper on, scuff the surface with sand paper to give it something to bite into.

Another thing that works is spray on gasket remover. I buy mine at NAPA and it strips paint very well too. Use the same tinfoil trick

[dpd069]

Buy some aircraft stripper at a body shop supply (not the stuff at Ace) store and a cheap chip brush. Goop it on pretty thick. Cover the area you just gooped up with stripper with tin foil to hold the stripper chemical against the paint. Let it sit for about a day or so.

Before you put the stripper on, scuff the surface with sand paper to give it something to bite into.

Another thing that works is spray on gasket remover. I buy mine at NAPA and it strips paint very well too. Use the same tinfoil trick

[CRXMiniMe]

ya no problem. if u have any more questions just ask me I am a painter at a body shop

help finish me paint my car!!! lol

[da9_boosted17]

lol takes so much time i just got done with mine gl bro