PDA

View Full Version : question with slicks???


Obd1_GsR
08-22-2008, 03:36 PM
I have a Crx and im not to smart when it comes to sizes.. what would be the best size slicks for my car it will be hopefully be making 13 sec passes if that changes the profile slicks??

ILIKETODRIVE
08-24-2008, 11:10 AM
13x7 Lenso wheels with either 22x8x13 or 23x8x13 slicks, depending on how much torque/power you have and gearing.

Obd1_GsR
08-24-2008, 08:13 PM
about 185 whp but not sure the torque and its a y1 lsd tranny... im on hx's with street tires so as you can imagine there is alot of spinning

taggart_lumpy
08-24-2008, 08:16 PM
22x8x13

http://www.mandhtires.com/store.php?crn=71&rn=274&action=show_detail

mt even has a 20in slick that will work with the rims you currently have
but be weary on that tire size

Obd1_GsR
08-24-2008, 08:30 PM
22x8x13

http://www.mandhtires.com/store.php?crn=71&rn=274&action=show_detail

mt even has a 20in slick that will work with the rims you currently have
but be weary on that tire size



cool thnxs, and that profile slick wont have a clearance issue on the car??

ILIKETODRIVE
08-25-2008, 06:16 PM
If you're slammed, maybe.

Obd1_GsR
08-27-2008, 01:00 PM
haha, well im on coilovers so i guess im gonna have to monster truck it..

ILIKETODRIVE
08-27-2008, 06:41 PM
You shouldn't have to.

I run 205/55-14 drag radials. My car is pretty low and I have no problems at all.

1lowtacoma
08-28-2008, 09:34 AM
about 185 whp but not sure the torque and its a y1 lsd tranny... im on hx's with street tires so as you can imagine there is alot of spinning

you need 22''s homie.
if you have a 4.4fd, wich you do, you need 22''s with your power setup/tranny
trust me.

Im running 23'' due to the fact that i was in the top of 5th gear in the 1/4 with 22''s :thumbsdown:
i had no problem, until i upgraded to a 4.75FD, then i needed 23''s

and get that thing tuned and on bigger cams, she should be well above 200whp.

Get a traction bar/bomb shocks. 12's all day after a tune. :bananaman:

PM ME if you have any questions like this one

Obd1_GsR
08-28-2008, 07:56 PM
cool man, thanks i love the swap man!!!

Deviousjet
10-07-2008, 09:10 PM
Anyone know of any good brands for slicks?