PDA

View Full Version : Best rim size


iApex
08-22-2008, 04:10 PM
i am looking to buy new rims and was just wondering what size everyine is running. im looking at some budddy club wheels that are 15x6.5 with a 35mm offset. i will just use these to get me by untill i can afford another set of wheels that i will put some 225 R compounds on. and then the buddy club wheels will just my my dd wheels. any input on the matter would be great... THX

ILIKETODRIVE
08-22-2008, 05:03 PM
15x7 +42 FN01R-C's with 205/50 RA-1's

That wouldn't be a bad route to go. 15x6.5 is enough wheel for 205/50's. Then you can step up to 7.5's or 8's for the 225's.

Tage
08-22-2008, 05:36 PM
15x8" 949Racing wheels (either a 205 or 225 will fit fine on them)

If you don't want to roll your fenders then go for the 15x7.5" wheels.

http://www.949racing.com/index.asp?PageAction=VIEWCATS&Category=33

Tell them "Tage" sent you!

iApex
08-23-2008, 04:23 PM
Thanks guys. the 949 wheels are the ones i plan to put some R compounds on down the road.

iApex
08-25-2008, 03:56 AM
I have been trying to decide if i should go with the 15x6.5 +35 or the 15x6.5 +40. Will i rub on one of them? what is the actual difference in handling with the two offsets? turn in and ETC. or is that tire dependent? Thanks.

Kinetic
08-25-2008, 11:27 AM
You can get decent, cheap 15x7's so why not get those now....unless you are hung up on Buddy Club wheels

if that is the case call Apex Motorsports/UMS Tuning they are a vendor on here and can get Buddy club or just about any other wheel and tire you want.

BlueTeg
08-26-2008, 12:44 AM
15x8 for a track wheel (225 width)

15x7 for a wheel that has daily driver duty plus occasional track time. (205 if you don't want to rub or roll your fenders)

iApex
08-26-2008, 02:40 AM
i cant find any decent 15x7.. websites or suggestions would be great.

BlueTeg
08-26-2008, 09:28 AM
949
Kosei
SSR
Enkei
Rota

All make a number of 15x7 wheels, just depends on what look you're going for and how much you have to spend.

Tage
08-26-2008, 09:33 AM
949Racing.com FTW!

15x7
15x7.5
15x8
15x9

ILIKETODRIVE
08-26-2008, 12:21 PM
Just get the 15x7 949 wheels . Then, sell the 15x7's to upgrade to 15x7.5's or 15x8's when you need track only wheels.

iApex
08-26-2008, 10:03 PM
well see theres more to it i bought the car with 16's on it, that i dont want. Eventually i want 2 sets of wheels. A set i can use as daily drivers, and then the 949's with the nitto n1's. but before i buy the set of wheels that im going to make a dedicated set of track wheels (949's with nitto's} i want to have a set of daily driver 15's. so they are the same size.

ILIKETODRIVE
08-27-2008, 01:15 AM
http://www.teamdynamicsracing.com/pro-race/Pro-race12.htm

15x7, 4x100, +35 or +40

Kinetic
08-27-2008, 09:56 AM
http://www.discounttiredirect.com/direct/findWheelsBySize.do?wd=15&bp=4-100*9-100&rw=7

don't forget to check out your local vendors...they can help you finds wheels/tires

EG6-DC2
08-27-2008, 10:43 PM
http://www.teamdynamicsracing.com/pro-race/Pro-race12.htm

15x7, 4x100, +35 or +40


Those are my wheels, though I have a +38 offset.

krash133
08-29-2008, 03:59 AM
Depends usually what you want to run, but if your not restricted by rules run the lightest, smallest, wide-est wheels you can fit under the fenders