PDA

View Full Version : For Rent: better gearing and more grip :)

BlueTeg
08-27-2008, 05:43 PM
Thanks for looking, but these are sold.






Moderators: please do not move. This is a Road Race specific thread. Thank you sirs. :) If unacceptable topic material, please feel free to delete.

http://www.azht.net/forum/showthread.php?t=69041
13" x 8" Rota RB's wrapped in Kumho 710's. Will clear any OEM brake setup....not sure about aftermarket upgrades like Wilwood or Brembo. Remember that the smaller rolling diameter of the overall wheel/tire combo is like adding a higher final drive to your transmission. More acceleration, y0!

PIR is coming up next weekend. I know some of you track junkies are going to want to pull some geeeeeee's at PIR. $50 for the weekend or $30 for a day.

I will provide transport of the tires to and from the track. You arrive and install and get ready to roll some of your fellow trackmates. :upyours:
Rufus
08-27-2008, 05:51 PM
You're renting wheels?
cjb
08-27-2008, 06:16 PM
You're renting wheels?

Gabe I might consider this, just depends if I get the daily ready by then.. I will let you know. I would be interested in just a day use.
ILIKETODRIVE
08-27-2008, 06:16 PM
You're renting wheels?

Gabe's Rent-A-Tire Center. You've never been?
cjb
08-27-2008, 06:17 PM
Gabe's Rent-A-Tire Center. You've never been?

why you gotta be posting when I am???
ILIKETODRIVE
08-27-2008, 06:19 PM
why you gotta be posting when I am???

Why YOU gotta be posting when I am?

Get back to work!
BlueTeg
08-27-2008, 11:04 PM
You're renting wheels?

Yeah, think of it as renting a set of sweet wheels for a car show or set of slicks for the drag strip.

You don't want to pay the hundreds of dollars to own them, you just need them for the day. Same concept. I would ideally like to sell them, but if I can't I'd rather make a few bucks and let people get some use out of them.

:doobie:
PhoenixB16
08-28-2008, 09:38 AM
gabe,im considering this.
krash133
08-29-2008, 03:55 AM
We should talk about those wheels buddy.........Durkee
BlueTeg
10-14-2008, 05:11 PM
These are available for the Thanksgiving weekend event. $30 for a day or $50 for the weekend.
SlowCivicHmm
10-14-2008, 06:19 PM
lol will the tires hold up still?? lol....

I call dibbs in december if they are available still?? hehe
BlueTeg
10-29-2008, 10:25 AM
Joser (or you other track whores) I know you want these for FIR-E this weekend.....
PhoenixB16
10-29-2008, 10:32 AM
got a suspension i can rent? lol
BlueTeg
10-29-2008, 01:38 PM
Actually I have been toying with the idea of getting rid (read: selling) of my Koni yellows and GC coilovers, and Skunk camber kit.

Does your car have stock suspension that you could trade (plus some dough) Brett?
PhoenixB16
10-29-2008, 01:40 PM
Not stock,Tockico Illuminas and eiback pro kit. might as well be stock. Its only like a 1.3 inch drop.Do not know where the hell my stock crap is at the moment.
dantana
10-29-2008, 09:32 PM
eg and ek rear are diff!:roll:
riceboy88
10-29-2008, 09:48 PM
eg and ek rear are diff!:roll:

i think hes talking about the si
PhoenixB16
10-29-2008, 09:57 PM
eg and ek rear are diff!:roll:

you been drinking?
dantana
10-30-2008, 08:54 AM
i think hes talking about the si

so was I

rear struts are different on gabe's eg and brett's si (ek's have a wider fork for the LCA)

and yes brett, i was drinking when i posted that:grin:
BlueTeg
10-30-2008, 09:41 AM
Brett's car and my DD are the same. These would not be the Skunk coilovers and Koni's from the beater. /discussion. :offtopic2:
Brett: I'll contact you via PM to discuss
ILIKETODRIVE
10-30-2008, 10:37 AM
rear struts are different on gabe's eg and brett's si (ek's have a wider fork for the LCA)

Got it backwards: EK's have a narrower fork. Old man Phil is running EK Tein's on his EG and he had to shave the inner sleeve of the RLCA bushing down a bit for them to fit.
cbaracing
10-30-2008, 12:09 PM
but you can run EG/DC rears on an EK with 2 12mm washers :clapper:
dantana
10-30-2008, 12:59 PM
Brett's car and my DD are the same.

DOH!
was thinking of your TT car!
ILIKETODRIVE
10-30-2008, 04:28 PM
but you can run EG/DC rears on an EK with 2 12mm washers :clapper:

Yup...but not always. ;)

Long story short, ask Anthony about it.
cbaracing
10-30-2008, 04:49 PM
Yup...but not always. ;)

Long story short, ask Anthony about it.

doh
what happened grasshopper?
allbossbra
10-30-2008, 07:31 PM
doh
what happened grasshopper?

be sure to check the height of the hoop where it bolts the the rlca. do this first! dont take apart everything and make my mistake. oh and be sure to get the sweet cba washers also
yosshaa
11-14-2008, 02:59 PM
ill rent your wheels but you have to mount them and take them off..... i don't want to catch the clap from your set of std wheels.
:clap:

see Seinfeld's "tractor story"