How much comp is too high.

[ICD]

ok I'm a in an lil problem. I got a gsr and have sir-g pistons which from I've read are rated at 10.6:1 compression or is that too high I think stock get
10:1 .do you guys think it would be Safe to run with about I say no more then 10# tuned Of course. I've read a lot and can't really find a solid answer. Kits been gather spider webs and wana put it on already.let me know if you guys need other info

[AZ_CIVIC]

I am running 10:1 compression pistons in a fully built closed deck sleeved GSR and am going to run around 28 pounds of boost when I get dynoed next week, I have already ran it at 20 pounds of boost and made 500WHP with no problems, as long as your block is built right your can easily run 10 pounds of boost on 10:6:1 compression.

[ICD]

I know a fully built won't be A problem but I'm asskin about a fairly stock bottom end. And only really looking for like 270 up.mite just have to get lo comp pistons

[AZ_CIVIC]

Fairly stock as in stock sleeves, you should still be OK.

[JoshDC2]

hmm.. i think you could get away with it. definately on a conservative tune. but im no tuner so dont take my word.

[FranktheTank]

hmm.. i think you could get away with it. definately on a conservative tune. but im no tuner so dont take my word.

You can.
Don't Run crazy boost and get a good tune and you should be safe.

[*inFamous*]

did 300whp on my stock sleeves on 11psi with the LS/V a long time ago. Its fine, just have Joe At locash tune it :)

did 268whp on my stock sleeves at 9psi on a straight LS lol

GSR turbos on 10psi make good power safetly all the time

What size turbo btw :)

[94b16delslo]

did 300whp on my stock sleeves on 11psi with the LS/V a long time ago. Its fine, just have Joe At locash tune it :)

did 268whp on my stock sleeves at 9psi on a straight LS lol

GSR turbos on 10psi make good power safetly all the time

What size turbo btw :)

can i ask what the 300hp ran in the 1/4 mile or did you never run it??? just curious cause i have a friend looking to ls/v all stock with about 10 pounds of boost

[*inFamous*]

can i ask what the 300hp ran in the 1/4 mile or did you never run it??? just curious cause i have a friend looking to ls/v all stock with about 10 pounds of boost

Eh the LSV got a few runs, 12.7 at 121mph on Azenis. Not fantastic but traction was a mite of an issue.

Keep in mind the times will have alot to do with how the turbo lays out the powerband. (not all 10psi cars are the same basically).

I personally wouldn't every buy a used Stock built honda lol. Who knows how its been treated!

[94b16delslo]

oh no he wants to build it maybe my wording was bad. yeah i agree never would buy it pre built.. thats kinda iffy

[ICD]

my comp is 225psi

[taggart_lumpy]

youll be fine
take it to joe for tuning
dont cut any corners on putting the kit together though

[ICD]

andturbo size is a 50 trim I think the kit is good for what a need.

[crtEG6]

youll be fine
take it to joe for tuning
dont cut any corners on putting the kit together though
X2

gsr at 294whp at 12lbs but fairly stock motor-ish

all in the tune my friends do u mean stock everything ur just in motor wise? upgrade fuel but im sure u know the rest!

g/l

[Mafioso]

when it blows is when it was too much..

[FranktheTank]

when it blows is when it was too much..

:blunt: