Jackson Supercharger ?'s

[jackson nation]

I have a Jackson racing supercharger on my D series engine and am runnin a 6 lb kit. Looking for an eight or ten lb pulley and belt any help is appreciated!!!

[2.3Tnut]

endyn www.theoldone.com i'd highly reccomend a 1.75" primary header with 2.75"+ collector with a 10psi pully. they used to sell a kamakazi one built to there specs????

[jackson nation]

I have all of that I am just looking for a smaller pulley and the belt to match. I dont know where to find it, maybe you do?

[The President]

ever think about jackson racing? they might have the shit you need...

[jackson nation]

As far as I know they do not

[The President]

I'm sure they make additional pullies for that charger, you'll just have to get a custom belt made, or take up the extra slack with the tensioner (if it's not maxed out already)

edit, look like they have a larger idler pulley, that should increase boost. do you know if the idler pulley is a 2" or 2.5"?

[2.3Tnut]

just browsed around endyn's site and it appears they ditched all the supercharged stuff. they used to carry it and a kamakazi header spec built for a JR sc. try contacting them to see if they have any laying around. i'm positive they carried them at one time. been 3+years since i've played with a jr sc.

[2.3Tnut]

I'm sure they make additional pullies for that charger, you'll just have to get a custom belt made, or take up the extra slack with the tensioner (if it's not maxed out already)

edit, look like they have a larger idler pulley, that should increase boost. do you know if the idler pulley is a 2" or 2.5"?

idler pully won't change boost. he needs to change the little "jack shaft" pullies for more boost.

[The President]

idler pully won't change boost. he needs to change the little "jack shaft" pullies for more boost.

for my curiosity, why do they offer the idler pulley in two different sizes?

[2.3Tnut]

for my curiosity, why do they offer the idler pulley in two different sizes?

belt wrap. the original one from the kit was smaller and they had belt slip issues due to a lesser amount of belt wrap around the superchargers pully.

[PhoenixB16]

MVM . If you are the dude at the QC meet I already mentioned this to you. Look on Ebay for used ones. Or HT.

[xactdyno]

larry is no longer making pullies for jr kits. not worth his time he says.
but he does have some in stock still. he'll need to know the diameter of the one you have on the car to be able to get you the right one. have that and call him monday or email him at staff@theoldone.com

[AZ_CIVIC]

I have a the endyne pulley for sale brand new and it is sitting with Tim at Xact dyno. PM if you are interested.

[EJ6-4DR]

;) close tread hes going turbo ls-vtec :drunk: