what is expected from this motor

[young_ar]

motor-stock b16a2 with ctr cams itr intake mani
450cc dsm

turbo-
. 50 A/R COMPRESSOR

.63 A/R TURBINE

.57 TRIM

plan on running 10-12 psi
so wat u guys think will be whp
I am shooting for 300whp.

[jakellama123]

might be abke iri hit 300whp
but u should get new pistons and rods if its ur dd

[young_ar]

it's not my dd so not too worried as long as it last 6 months or more it's good only with occational driving but mostly weekend warrior lol.

[2.3Tnut]

judging by your turbo specs sounds like a chineese turbo. so I suspect ~300hp and within a few months power will taper off as the turbo starts to kill its self. reliability is very questionable with those turbos. again asuming its chineese. also remember your going to be on the edge of 450's at 300whp.

and as always. its all in the tune!!!!

[tWeAk_TuNe_kAboOm]

i could see it hitting 250 on 11 or so psi... if it can hold boost. good tune and hit that 12psi mark i see it getting a max of 280 just my 2 cents..

[young_ar]

I know it's a gsr but my b16 should not be too far from a usdm gsr
http://www.youtube.com/watch?v=uCvGmEXcNnA

[sohcisme]

Just take it to get tuned and see what the most it will make safely before the power starts falling and there you go. Locash will take care of you.