PDA

View Full Version : DC5 on 3 cylinders I NEED HELP!!!


LS-S DA9
01-10-2009, 03:55 PM
ok so my buddy chad was driving his rsx-s and he is runnin an 80 shot of nos (dry). its hooked up throught k-pro and all and tuned in. when he sprayed last night it started sounded like a wrx and its runnin 3 cylinders.. the second cylinder from the passenger side isnt workin.. we tested for spark its there.. changed out plugs, changed injectors. still found nothing. the only idea we have left is the clip to the injector may not be gettin power, it doesnt change anythin when we un plug it..oh btw no knocks or anything, no vibrations, no smoking nothing outta the normal other than its not firing..
so we need suggestions and whatever help just to get it runnin right even if it means takin off the spray.. thanks guys

JdmMexican
01-10-2009, 03:56 PM
Its done

LS-S DA9
01-10-2009, 04:12 PM
oh AND KEEP THE NEGATIVE COMMENTS TO YOURSELVES.. thanks

p-townHONDA
01-10-2009, 04:27 PM
try getting a leakdown test

Shakezilla
01-13-2009, 04:28 PM
If you think it is the clip, check current to the clip. See if it is getting power.

ikon671
01-13-2009, 11:39 PM
did you try ever try a compression test? is the car smoking?

Dead Bird
01-14-2009, 12:49 AM
compression test in cylinder two is ZERO.
Head is almost pulled off.
HOPING its just a burn valve or few

crx2quik4u
01-14-2009, 02:32 AM
its a bent valve, it happened to me too

[Q]Powered_ITR
01-14-2009, 08:19 AM
yeah sounds like bent valve.

LS-S DA9
04-06-2009, 10:54 PM
i know this thread is old BUT ITS MINE.. it ended up being a burnt valve thanks guys..