Function7 LCA/Rear Sway Brace

[ASPEC]

I was lucky enough to be chosen by Function 7 to test this rear LCA/Sway bar brace.

I am running the Function7 LCAs as well. I recommend the setup for aftermarket spring/struts or coil overs, as this leads to heavy overseer if used on a slopy supension. Now, for those with full-race setups, this is an absolute must. I assembled it here with an ITR rear-sway, but it will fit a variety of aftermarket sway as large as ~30mm.

The setup has been track tested for numerous track days.\

Heres a pic of the install:
http://www.arizonarsx.com/forums/attachment.php?attachmentid=5847&d=1229313458

Now for sale through Locash Racing for a great deal, and can be seen in the July 2009 Modified Mag:
http://www.arizonarsx.com/forums/attachment.php?attachmentid=5957&d=1244522810

[Dead Bird]

Got DAMN!

Real nice! :thumbsup:

[PHX]

I had the full Function7 LCA/Subframe brace setup on my RSX and LOVED it. I'd definitely recommend it :thumbsup:

[h-vtec]

i want em i want em!!!!

[taggart_lumpy]

:thumbup:

[Mr.Burner]

Gotum loveum, recomended

[EMPYRE]

Dope

[**EJ1**]

I had the full Function7 LCA/Subframe brace setup on my RSX and LOVED it. I'd definitely recommend it :thumbsup:

That thing was sexy! You still have it?

[mike ek]

shit is purrty

[The President]

x2, that shit is fucking sweet looking.

[honduh_head]

omg thats fucking siiiiick!

[NBPMUGEN]

price?

[96accordsir]

sooooo sick

[thakid]

Tell them hook it up on my ep3

[skar1]

Are they goin to come out with other applications eventually? Or sticking with newer platforms?

[ASPEC]

F7 is continuously developing more suspensions bracing/replacement components for both older and newer model cars. We'll let ya know when we hear of something new.

[ASPEC]

Tell them hook it up on my ep3

$255.00 for the brace, and the LCAs also go for $225. These are killer deals, and the quality speaks for itself.

Function7 holds aerospace quality standards. I personally know the owner/designer/manufacturer (all one guy) and the man holds the highest aerospace standards for quality I have ever dealt with in the CNC billet aftermarket industry. His products are tracked to the raw material stock via a bar code. In the event a material flaw is discovered while in customers use, the entire lot of parts would be recalled.

I guarantee there arent 5% of the aftermarket products companies holding standards like that.

This is hand down the best stuff, at insanely cheap prices.

[thakid]

Tell him to hook it up. Ill sponsor that shizz homie

[ASPEC]

I dont know what that means buddy.

BTW, youll never get sponsorships approaching vendors like that.

Is this kinda shit just an AZHT thing or what?

[thakid]

I said i would like to sponsor their products. Im always showing off my car and letting people know where i get my products from. I get a lot a people interested in what i buy.

[atomicx]

Wow those LCA's look great too bad they are only for the DC5 and EP3... Or are they?

[RSXnCRF]

I said i would like to sponsor their products. Im always showing off my car and letting people know where i get my products from. I get a lot a people interested in what i buy.

LOL you fail. What makes your car anymore special than the next guys? Everyone on this forum has exactly the same thing to offer as you, and some even have more.

[locash]

Function7 makes control arms for EF/EG/DC/EK/EM/etc.. I run them on my drag car as well, nice stuff..

You can check out their products on http://function-7.com/

[zeik24]

looks :tits:

[MindlessChild]

Joe should throw in a free tune when i buy the sway brace :P worth a try eh ?

[ASPEC]

Its not the first time someones tried to get a free tune out of something. GL:)

[atomicx]

Function7 makes control arms for EF/EG/DC/EK/EM/etc.. I run them on my drag car as well, nice stuff..

You can check out their products on http://function-7.com/
my next paycheck is going to this now.:thumbsup:

[EM1 jooowizzzle]

wish i had a rsx i would rock them jus for the looks!