I thought about it while I ordered parts for my eg... I gots to get the daily looking decent before I can continue on the ef

her some progress. im just waiting on paint to put it back together and get it tuned

installed a voltage stabilizer onto the crx today, ill probably drive it to work tomorrow.

Ordered full amber corner and bumper lights...from egay...hopefully they fit right

Today I finished the passenger side ifthe wire tuck and half on the driver side. I ran it from the cab of the car threw the frame rail which I have never seen or heard of before. I'll post pics in a little. It was super easy

thats how were doing my black car. did you find a new sub frame yet?

put the front end back on after paiting it a couple of days ago n replacing the tranny seal...

Yea some nice guy sod me one for 20 bucks. It was a pain to swap the steering rack but once I figured it out it was cool. It's painted and on the car already. I wanna get these pictures up to see if you are doing it the same way I am. It's so simple. I drilled one 1/4 inch hole from the inside on the firewall and threw the frame, extended only the wires needed and got rid of the 50 grounds. I grounded all the lights really close to the connectors themselves.

here are the front pictures ill get some of the inside once i clean it up a bit.

God Damn those are some huge tires! jk looks good !

i finished my b16 swap, got rid of my "wetback rims" and put meshies on it with extended studs and lug nuts

My wires come out of the grommet on the far left side of your first pic and then into the frame leading up to the front. I ran my windshield wiper motor wires through the frame and out the hole next to the motor itself, worked out well IMO.

today i put new taillights in no more altezzas! reattached the sunvisors and that was it for today

got the OBD 1 conversion done. The car runs a little rough but it runs! Will adjust timing and turn it over again.

drag radial!!!! im hoping they will help with the traction issue i should be seeing here in a few days

i need to take more pictures of where my harness is actually entering the frame so you can see what i mean but i refuse to take a picture right now because theres no loom or tape around some of the wires and it looks ugly

finished sanding the passenger side....


there was so much clear coat on this thing. it took forever to get threw

Wow! You have nice aluminum DA radiator. I hope that I could also have it. :D

i got pulled over in my eg today :D

wiring for the runner lights failed so im workin thatt

so that has to do with your ef?

Celebrated my 5th anniversary with my Rex today. Five years and another 90K later and she's still purring. :grin:

annnnnnnnnnnnnnnd green.


Uploaded with



Aztec Green which is not tihitian green like i asked for but it works i guess. second time trying to paint and im happy with it. it way better than my first attempt

paint the trim!

Suck my dick! jk bring me the trim paint

oil change, brakes, brake fluid flush, fuel system clean and washed

fagg... :beatdeadhorse2:

thanks...?

my thoughts exactly.



the rex is really coming together nicely nick.

stared at my new si because it needs a fuel pump if you have pm me

PAINTED THE TRIM!? Y? :smackself:

I was to lazy to tape it off. It will be sanded and black soon. Why don't you answer your damn texts and stop acting like a bitch and bring me the lift!!!

Swapped out my SpecII style exhaust for a complete Apexi World Sport 2, and failed emissions twice. FML.