AZHT.net

AZHT.net (http://www.azht.net/forum/index.php)
-   Paint & Body Shop (http://www.azht.net/forum/forumdisplay.php?f=109)
-   -   rattle canned car, (http://www.azht.net/forum/showthread.php?t=185984)

S!K TEG 02-06-2013 01:16 PM

rattle canned car,
 

Hellsinki 02-06-2013 01:30 PM

Wet sand it start with 1000 grit

S!K TEG 02-06-2013 01:55 PM

i was also told that thinner works well but, i need to work out arm before taking one the job. lol

i'll start with 1000 grit and see what happens. if i can paint over it than i'll just go down to napa and buy priemer and oem color, then go to town on a fresh paint job.

Kahuna 02-06-2013 02:24 PM

If you do go with thinner...Only wipe in one direction and depending on what kind of thinner you use...Stay away from the rubber...The thinner may melt it.

Jason.AZ1 02-06-2013 03:48 PM

Aircraft paint stripper ;)

S!K TEG 02-06-2013 04:28 PM

the thinner i plan on using is the same as what i use to clean my spray gun, so it may be rubber safe. I will try to stay away from rubber though.

i only want to remove the spray paint, not leave it bare metal. lol

failedabortion 02-07-2013 01:21 AM

Shitty oven cleaner

S!K TEG 02-07-2013 08:11 PM

i already bought some, lol. i went to the dollar store and spent $50 on oven cleaner. Clerk just looked at me weird.

robinsonbarba 02-08-2013 12:36 AM

ill paint it! :P

S!K TEG 02-10-2013 11:20 AM

lol, i got this shit..

beil93 02-10-2013 02:23 PM

Try acetone (I think that's how you spell it.) I use this stuff at work and it took off spray paint that I used. You can get it at ace I think

usdmcivic 02-10-2013 03:07 PM

600 or 500 grit wetsand! 1000 will be too much work.. I stripped my trunk it was black and made it look electron blue .

I would post pics but dont know how lol

S!K TEG 02-10-2013 06:55 PM

photobucket.com buddy. i'd like to see the results.

usdmcivic 02-10-2013 11:38 PM


randizle 02-11-2013 05:00 AM

60 grit will work :)

S!K TEG 02-11-2013 08:33 AM

That's crazy, so crazy it might just work!

S!K TEG 02-11-2013 08:34 AM

Ill probably do a mixture of oven cleaner and what usdmcivic did.

usdmcivic 02-11-2013 10:48 AM


Just to be clear.. After youre done the clear will be gone.. Theres probably a way to keep the lear with a finer grit though like 800 or something.. I wish i had more pics to show you it leaves the paint kind of dull

S!K TEG 02-24-2013 02:37 PM

i understand the clear would be gone,

now, I was woundering if i can paint over the spray paint? I would have to scuff it up. Then, premiered so i can paint it using automotive paint.


All times are GMT -7. The time now is 12:04 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021